Results 1 to 6 of 6
  1. #1
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi

    Installing acceration cable ?

    Hey does anyone have any instructions for installing a new acceration cable to the acceration pedal ? preferably with pictures?
    thanks ...

  2. #2
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    ist pretty easy,

    - unpop the cable from the pedal,
    - go into the enginebay and twist the cable mount on the firewall and it will come off
    - undo the cable from the inlet manifold,


    fitting the new one is revers to taking the old one off. dont loose the gasket from the firewall side of the cable braket.

  3. #3
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    ive had so much bad luck with this acceration cable, i bought one from hontoys in yennora and they gave me the wrong one and gave my money back, went to hontoys in smithfield , gave me the wrong one and said store credit only no refunds after they insisted it would fit, went to honbits today and told them to make 100% sure its the right cable and wen my cousin tried installing it what do you know it doesnt fit. does anyone know were i could get one other than these places

  4. #4
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    push for a refund,

    they sold you something that you dont need and they cannot suply you with what you need.

    you have consumer right you know.

  5. #5
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    well the guy who took out the acceration cable said give him a refund , but the dodgy guy at the counter came up with some bullshit excuse how its the labour and that i said that i wanted an eg civic cable( i asked for eg civic rails and asked if they fit and they said yes, must of somehow thought that i said acceration cable too-even after i questioned the length of the cable they said yer it will fit when you put it in the car, but most probly just want my money) that cant be replaced this that, and offered for me to keep the cable or get a store credit. But luckily the good people at honbits asked me for a full refund or give a similar looking cable a go and it fit , so im cheering.
    In all Hontoys= Dont do any business with them, unless its your last resort
    Honbits= FTW..

  6. #6
    Member Array
    Join Date
    Jun 2005
    Location
    Melbourne
    Car:
    93 B16A DA9 Integra
    try oemacuraparts.com
    i emailed them last week, got a reply within 24 hrs, they ship to australia and the cable should only cost round $30AUD delivered.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.