sway bars on EG

**akusuma** · 19-03-2008 04:29 PM

I have a couple of questions regarding sway bars on EG vti

1. Can I use the EM1 end links or I need to use my current EG end links to fit the EM1 FRONT sway bar on the EG?
2. For the rear ones, do I need to use EG6/DC2R LCA to fit DC2R rear sway bars on the EG? Should I use the end links from the DC2R sway bar or use the end link from current EG sway bar?

thanks

**An41** · 19-03-2008 04:42 PM

2. No, you can run DC2R swaybars on EG vti,si. DC2 LCA's

**akusuma** · 19-03-2008 04:47 PM

thanks for the reply, is that with DC2R end links or EG end links if I want to use non EG6/DC2R LCA?

or I can use any end links ?

**jdm_kid** · 19-03-2008 04:54 PM

u do not need EG6/DC2R LCAs to fit the ITR sway bar. Stock LCAs will be fine.

**akusuma** · 19-03-2008 04:56 PM

even if I want use DC2R end links right?

how bout number 1? what do I need to fit EM1 front sway bar on EG? just change the end links?

thanks

**jdm_kid** · 19-03-2008 04:58 PM

Yes you can use DC2R endlinks that came with the DC2R sway bar.
No the EM1 front sway bar wont fit your EG. who told u that ?

**akusuma** · 19-03-2008 05:01 PM

ok. nobody told me, just thought that em1/ek4 front sway bar can fit on EG/DC if I change the end links.

**jdm_kid** · 19-03-2008 05:04 PM

nope. u gotta think about the chassis mate. EM/EK are never interchangeable with EG/DC.

**akusuma** · 19-03-2008 05:06 PM

cool, thanks for the clarification.

**bennjamin** · 19-03-2008 06:43 PM

Originally Posted by jdm_kid

nope. u gotta think about the chassis mate. EM/EK are never interchangeable with EG/DC.

Not chassis....subframe

To fit a EG/DC swaybar to a EK and vice versa - you need the front subframe and LCA's from the swaybars original fittment.

IE

DC2R swaybar onto a EK - you need DC2 / EG subframe.

EK swaybar onto a EG - you need EK4/EM1/EK1 front LCA's and EK subframe