2l Na B18c Stroke Choice

[B18cEG]

Hey everyone, i am nearly finished my high power 2L b18c and just got one last decision to make, stroke size. I am after a little more torque so at the moment i am thinking to go with 89mm over the 87.2 because it will give me a rod/stroke ratio of about 1.70 along with the raised deck, My question is how much difference in torque will there be if i go for the 89mm or even 92mm stroke over the 87.2, nothing higher than that because i still want to keep a good ratio.

If anyone can help that would be really great.
Thanks

87.2 = 1.73
89 = 1.70
92= 1.64

[whtcrx]

Go the 92m stroke.
1.64 r/s ratio is still capable of 8.5krpm and the torque will be unbelievable.

[ZeForce]

Whats the point of having a raised deck if you dont take full advantage of it and use the longer 92mm stroke?

[B18cEG]

The stock is about 1.58 and they still rev to 9.5k+, The advantage is the better rod/stroke ratio, and the added strength of the ERL superdeck II.
http://www.erlperformance.com/index....=115&Itemid=98

[ProECU]

9.5k+ rpm stock hey? allriiiiiiteeeo!

Im always amazed how much tripping goes on around this forum....

Where do people get their info from ? some parallel universe?

9.5k+ rpm will give you this....
http://www.ozhonda.com/forum/showthr...17#post1612117

[B18cEG]

9.5k+ rpm stock hey? allriiiiiiteeeo!

Im always amazed how much tripping goes on around this forum....

Where do people get their info from ? some parallel universe?

9.5k+ rpm will give you this....
http://www.ozhonda.com/forum/showthr...17#post1612117

U are clearly an idiot or you just cant read, notice how i said the stock rod/stroke ratio is about 1.58 and they can rev to 9.5k, nothing about the motor or how it is built but the rod/stroke ratio! I said nothing about a motor running cams and boltons with stock valve springs. What u got to say about that, or have u got more sarcasm pouring out ur mouth like dioareah.

[ProECU]

just more sarcasm...

[B18cEG]

just more sarcasm...

So what r u saying? that a motor with a rod/stroke ratio of 1.58 cant hit 9.5k
tell me that genius

[ProECU]

The stock is about 1.58 and they still rev to 9.5k+,

show me a stock b18c that is capable of this...

[B18cEG]

show me a stock b18c that is capable of this...

ur an idiot, i just told you im not talking about a stock b18c but the stock ratio of 1.58

[ProECU]

ur an idiot, i just told you im not talking about a stock b18c but the stock ratio of 1.58

then show me an example of this one....lol

[kyle]

rofl