CXI shift speeds

[vinnY]

don't those aftermarket tacho's have a switch for 4cyl, 6cyl and 8cyl? sounds like its on the wrong setting mate
if the cxi's gear ratios are anything like the b16a's, then at 75 in second you'd be in excess of 5000rpm

[phil3842]

i just installed an apexi rsm on my cxi. plus it gives you speed, revs and voltage just something to consider instead of just a tacho

[mrwho]

How about a Apexi safc? Also has tacho and tunes your air and fuel mixtures for better engine response?

[kraiye]

about 95 in second is rev limiter. hit 90 a couple times and listen to the engine. that will be your shift point
60 in 2nd is about 4000rpm which is when my Y4 seems to start making power

[AutoNoob]

don't those aftermarket tacho's have a switch for 4cyl, 6cyl and 8cyl? sounds like its on the wrong setting mate
if the cxi's gear ratios are anything like the b16a's, then at 75 in second you'd be in excess of 5000rpm

lol iC, kool i think it doesnt ...
i'll check 2moros.

LOL...the switch was like sunken so i didnt see it

makes more sense now...75kmh at 5000rpm sounds about right it was on the 6 cyllinder.. I really thought the cxi was 6!!!

[Rehaan Khan]

hey all

i got a honda cxi 2000 ek civic and it doesnt hav a speed tachometer. at what speeds should i shift the gears to get maximum power without redlining the car?

i heard that it can shift 1st at 50kph, and 2nd at 85kph, 3rd at 130kph...

are these safe speeds?

srry bro but i think that too...

[02gzm]

Go buy a GLi cluster and swap it in. It'll look better than an aftermarket tacho. It's pretty much just plug and play. There's a DIY in the DIY section explaining how to keep your speedo so you keep your odometer reading too. It's quite straight forward.

[trism]

I really thought the cxi was 6!!!

i dont know if youre being serious or not