Brisbane - Brake Light Mod Group DIY Day

[DavidLing]

hey guys
i decided to drill it just then ...very easy, only took 2 minutes. but it require to have a flexible attachment drill, or else its impossible.

only thing with drilling from the inside is all the plastic drop everywhere and u can see it through the lense, but i just got a vacum cleaner and suck it out.

i havent got my light bulb holder yet.. so i shove the one from the top to see if it fits...it fits very tight.

Hi Kin, Do u mind to bring the drill on the DIY day, and show us how to drill it without take off the rear bumper.

Kin and Oldman, if u guys have a peice of water hose, do u mind to bring it on that day as well? thanks

[kin]

sure.. no problem

[DavidLing]

sure.. no problem

hi Kin. just wanna confirm that u will bring the drill, or the peice of water hose, or both? Thanks!

[Philip Lee]

water hose?? i'm sure there are some lying around & we'll just cut a bit off without letting anyone knows... haha

kin, all the bits & pieces are available @ Jaycar/Bunnings.

[Philip Lee]

do a write up pls so ppl in Melbourne can have a similar metting as well

will do mate.

[superlover]

will do mate.

Hello,Philip lee,
Excuse me , i also interest to do the Brake light as well, But now i asked the Honda dealer for the 33513-SAA-003,BUt they said need to wait 2 weeks probably, So how can i do,Can i buy that at another place? Thx

[Philip Lee]

Hello superlover,

i assume u're in Brisbane too right?

if so and you're interested to come along on Saturday, please do the following:

1. order a pair of 33513-SAA-003 at any Honda dealer. i got mine from Sthside Honda and i believe u'll need to wait but it's ok;

2. please buy the following bits & pieces from Jaycar/Autobarn:

1. Light blub x2
2. wire (1m is more then enough)
3. female speaker plugs (1 pack) - this is be the smallest one available as there're not much space;
4. electrical tape;
5. 6x solderless connector. (kmart $1.99 a pack of 4, buy the red ones).

bring the above and come along on Saturday morning. we'll drill the holes and wire everything up. and when the parts come, you can finish it off.

if you're not confident with the final bit, we can organise a day to meet again & do it together. but it's very easy and once u see it on Sat, u'll be able to do it.

these are the best instruction i've seen so far. i suggest you read it carefully and make sure u buy the right parts (size etc):
http://www.snake.ne.jp/%7Efooser/report/tail/tail.html

http://hondafit-web.hp.infoseek.co.j...p02/lump02.htm

p.s.this post applies to all those who want to come along, just buy the above and come along.

see you all on Saturday.

cheers
Philip

[superlover]

Hello superlover,

i assume u're in Brisbane too right?

if so and you're interested to come along on Saturday, please do the following:

1. order a pair of 33513-SAA-003 at any Honda dealer. i got mine from Sthside Honda and i believe u'll need to wait but it's ok;

2. please buy the following bits & pieces from Jaycar/Autobarn:

1. Light blub x2
2. wire (1m is more then enough)
3. female speaker plugs (1 pack) - this is be the smallest one available as there're not much space;
4. electrical tape;
5. 6x solderless connector. (kmart $1.99 a pack of 4, buy the red ones).

bring the above and come along on Saturday morning. we'll drill the holes and wire everything up. and when the parts come, you can finish it off.

if you're not confident with the final bit, we can organise a day to meet again & do it together. but it's very easy and once u see it on Sat, u'll be able to do it.

these are the best instruction i've seen so far. i suggest you read it carefully and make sure u buy the right parts (size etc):
http://www.snake.ne.jp/%7Efooser/report/tail/tail.html

http://hondafit-web.hp.infoseek.co.j...p02/lump02.htm

p.s.this post applies to all those who want to come along, just buy the above and come along.

see you all on Saturday.

cheers
Philip

Thank you very much ,WOuld u mind to give your moblie to me ,That's i think easiler to call u .anyway i send my moblie to your pm box in Fitter club of hk .Ok?

[Philip Lee]

PM sent.

[DavidLing]

Hey! everyone, GOOD NEWS. I rang to Southside Honda, and the staff said some sockets are arrived from Japan. I got it today, so if u have ordered it, u better check with them.

[Philip Lee]

hi guys,

if you have time today, please get those female pin thingy connected to the cables first. this will save time tomorrow.

see ya tomorrow.

cheers
Philip

[superlover]

Hey! everyone, GOOD NEWS. I rang to Southside Honda, and the staff said some sockets are arrived from Japan. I got it today, so if u have ordered it, u better check with them.

Excuse me ,Do u think they still have two? and WHat is southside Honda phone number aR~,How much per one aR?i Hope can reply me as soon as possible,Beacuse IF i can ,i will get tomorrow ,Thank you