want lower the car, need suggestion~

[bennjamin]

You obviously didn't read the post by AHJ that i was replying to.

i surely did , but we are trying to help the original thread starter. Not repeat the same answer the post above you Try answering questions

i want do it in once as well, i dont want replace so many times.
tein SS is good, but all the second hand one is more than 800.
which one is better choice, replace the spring?or replace to tein SS?
also, how many should i drop if i have manufactory lips on?
cuz it looks like more lower with the lips.

tein ss are fine - i installed a set on a customers car yesterday and they feel firm and fine. The bonus is you can adjust their height to whatever you want. springs + shocks generally cannot be adjusted in height.

I still think if you set a budget in your mind , king springs will be fine for a slight drop and wont ruin your ride. Just dont get "super lows"
The front and rear lips will help make the car look lower but take care with them if your car gets lowered

[tony1234]

i surely did , but we are trying to help the original thread starter. Not repeat the same answer the post above you Try answering questions



tein ss are fine - i installed a set on a customers car yesterday and they feel firm and fine. The bonus is you can adjust their height to whatever you want. springs + shocks generally cannot be adjusted in height.

I still think if you set a budget in your mind , king springs will be fine for a slight drop and wont ruin your ride. Just dont get "super lows"
The front and rear lips will help make the car look lower but take care with them if your car gets lowered

I am answering questions i don't see what your problem is with that.

[bennjamin]

this is bentusi123's thread not AHJ's - they can make a thread about their own questions any time. Lets keep this on topic for bentusi123's benefit.

[bodaas]

hey, guys.
i want lower my car about 1"-1.5". budget below $500.
any suggestion which spring should i go? and is it just replace the spring?
what else i need take care about?
cheers

1.5" lower is nothing,
king spring is best choice for you for $500

if you want lower 2-3", i suggest custom kmac spring, because kings is too soft

[bentusi123]

come on guys, no fight.
it is no matter who answer whos question.
as long as i get the suggestion.
maybe i will get some extra information when people answer other poeples question.
all the discussion about lower the car r welcome.
cuz maybe i just want change the spring in the first place, but after the discussion, i change my mind to replace to tein SS.
it is good when result apear in the discussion.

[power_of_dreams]

just save up a bit more and buy a set of used tein ss or eibach springs + konis / bilsteins for ~ $800. Try to do it right the first time.

$800? Good luck!

[bentusi123]

Skunk 2
Lowering Springs:
4.)NEW!!!!!!!!! HONDA ACCORD CL9 (1.3" - 1.2")
Price -- $265.50

does anyone know or used this one before?
and how much cost me for the labour? just replace the spring?

[bentusi123]

$800? Good luck!

how much u think it will be? for second hand tein SS?
i know the new one cost $1100 something.
the price all drop down at this time.

[bennjamin]

something to help you.....

http://www.ozhonda.com/forum/showthread.php?t=91068

For sale: Koni Yellows Shocks + Eibach Pro Kit Springs for CL9
Price and price conditions: $800 ono
Comments: Approx 10 months old, used for about 10K kms, like stock handling and comfort

shoot him a pm

[bentusi123]

thanks

[racerwannabe]

$800? Good luck!

Read "USED". Currently, someone is selling used eibachs + konis for $800. I have also bought a used set for a bit more than $800. Thats a reasonable price.

[akina]

regarding the tein SS, its fine with the ride comfort + handling. but what gets me is the amount u can lower at the rear, u can only go 50mm lower. and after sum rims u need an extra drop which u dont get.
i would personally get sum buddyclub N+, unfortunately wont we within ur price range. its around $1600.