nah I know what you mean - i've had the EF8 items also - had to 'bore-out' the eyelets to fit the EG6 shocks etc.. as far as MY EXPERIENCE goes, the EG6 items were a little shorter - just a few mm.. but otherwise the same as DC2-R except most of the EG6/9's out there dont have ABS so the DC2-R will all have little holes to fix the ABS lines / wiring to the LCA.

one thing to note is as these parts are all very similar to look at - your wreckers can tend to get them mixed up - I was sold EF8/EF9 LCA's as being EG6 the first time round and only after I had a DEFINATE set of dType R LCA's that I noticed the differences and when i had one side EG6 an one side DC2-R, the slight difference in length made a noticable difference in the camber