Page 4 of 5 FirstFirst 12345 LastLast
Results 37 to 48 of 53
  1. #37
    Member Array
    Join Date
    Oct 2005
    Location
    Syd
    Car:
    Integra Type R
    Quote Originally Posted by EK9 View Post
    hard to tell what size... look like 15s to me...

    my guess would be 15x7 +24... cos +32 generally would sit flush with the guards without camber. This guy's camber is nuts, so the offset's gotta be lower imo...

    The tyres ain't stretched (can tell as rim dish ain't sticking out past tyre wall) so he's got some stockish width, i reckon 195/50/15 cos it's pretty low profile.

    But yeah, have fun driving like that
    No. That eg is running 15x7 +35 offset with 195/50/15. Should rub over humps even with max rolled guards.

    Mine
    Wheel: Enkei Racing S
    Size: 15 x 6.5
    Offset: +32
    Color: black w/polished lip
    Tire: bridgestone gIII and proxes 4
    Size: 205/50R15
    Lowered?: Yes
    If Yes, What Setup?: apexi type v damper
    Front Rubbing: Onfull
    Rear Rubbing: Yes, because of wide tyres and guard not rolled.
    Comments: With a setup like this u must camber or get smaller tyres to cancel the rubbing. otherwise dont bother with passengers and back seats.

    Will update again when roll 15X7 +25 offset and 15x7 +45 offset.
    Last edited by Sir_vtec; 29-05-2008 at 11:55 PM.
    mugen無限power

  2. #38
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    thats alright,coz the only thing in the back will be a halfcage.

    with a bit of camber, you reckon 15x7 with +25 on front, +30ish on back would be sweet?

    with 205/50/15s?
    to see all of my build, checkout


  3. #39
    Member Array
    Join Date
    Mar 2008
    Car:
    hardparked elmo
    Thanks sir vtec for adding to the thread

    Hoping to see some tyre tucking on sunday

    EGJOE

  4. #40
    Member Array
    Join Date
    Mar 2008
    Car:
    hardparked elmo

    Another pic

  5. #41
    Member Array
    Join Date
    Nov 2005
    Location
    Bogan from Logan
    Car:
    EG
    Quote Originally Posted by trism View Post
    ok so lets say i wanted fitment like this car





    what size and offset does that look to be running?
    That's Phaze2 EG's (search honda-tech.com). I'm unsure about the above polished CP-R's, but this is the same car running 15x8 +10 Equips 03's.

    Looks hot though, but I don't know about actually driving it.



    Last edited by shebangs; 03-06-2008 at 01:08 PM.

  6. #42
    Member Array
    Join Date
    Mar 2004
    Location
    Melbourne
    Car:
    usdm whore
    Quote Originally Posted by shebangs View Post
    That's Phaze2 EG's (search honda-tech.com). I'm unsure about the above polished CP-R's, but this is the same car running 15x8 +10 Equips 03's.

    Looks hot though, but I don't know about actually driving it.


    all these balling cars are for show.

    they drive it to photoshoots and big meet ups. all the other times, they sit in the garage

  7. #43
    yup But dam they are hot.

  8. #44
    Member Array
    Join Date
    Sep 2003
    Location
    Melbourne
    Car:
    98 EK9 CTR
    Quote Originally Posted by Sir_vtec View Post
    No. That eg is running 15x7 +35 offset with 195/50/15. Should rub over humps even with max rolled guards.
    are you sure about this? i highly doubt it... look at the dish and amount of camber he has. with the size/offset u mentioned, you wouldn't even need to camber that much.

    i've run at 16x8 +28 on my EK at the rears, and with some camber like him, it would have looked very similar...

    Quote Originally Posted by shebangs View Post
    That's Phaze2 EG's (search honda-tech.com). I'm unsure about the above polished CP-R's, but this is the same car running 15x8 +10 Equips 03's.
    damn... so like i mentioned earlier, it's reasonable to guestimate the first set at around +2x...
    arrowz

    OTO-KREW


  9. #45
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne
    Car:
    MkV R32
    Wheel: Dc5r stockies
    Size: 16x7in
    Offset: +45
    Color: Alloy
    Tire:Kumho Ecsta
    Size: 205/45/16
    Lowered?: Yes
    If Yes, What Setup?: Tanabe Coilovers
    Front Rubbing: Nope
    Rear Rubbing: Nope
    Comments: 5 stud and Type r Brakes. Brake calipers are about 1-2mm from touching the rim on the front.
    Picture:


  10. #46

  11. #47
    Member Array
    Join Date
    Mar 2008
    Car:
    hardparked elmo
    thanks bro for adding
    man they almost look like 17'

    EGJOE

  12. #48
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    lol thats coz they are almost 17"
    to see all of my build, checkout


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.