rattle in my gearbox/head

[rayb3na_]

oks dudes i randomly have something rattling around in my engine head at low rpms, but it USUALLY tends to go away if i shift at higher rpms still not sure what it is.. anybody got an idea?

also, gearbox rattles on idle.. i press clutch it goes away wtf? i had this problem before.. and got a new one and new clutch now its back? =[

[jdm_kid]

engine mounts

[rayb3na_]

so engine mounts have shit themselves? what about the actual rattling i hear in my engine?

[bennjamin]

sit there in neutral , slowly rev the engine. Can ya get the exact noise at a exact rpm ?
chances are its harmonics at that rpm from something either loose or too tight...

[jdm_kid]

if you car is shakin hardcore, and your steering wheel has lots of vibes then your engine mounts are gone.

your gunna have to describe the rattling more specify. lol if its like a tapping then your tappets need to be re adjusted

or just do what ben said. lol

[rayb3na_]

ahh want me to bring it over later ben? i can pick up the money off you too u can have a look for me.. it confuses me too =[

[bennjamin]

ahh want me to bring it over later ben? i can pick up the money off you too u can have a look for me.. it confuses me too =[

come over 2mrw morning if u have a day off work for free advice and sexy handshake

[rayb3na_]

come over 2mrw morning if u have a day off work for free advice and sexy handshake

ahaha awesome i'll give u a call around 10? what times morning for you though o0

[EG4-The_Win]

The rattling with the clutch sounds like your thrust bearing, or the springs on the plate bouncing around.

[SuiJin]

figure it out? i think its the same problem with mine,
recently got the clutch changed + upgraded
heatshield replace and flywheel machined.

and there's a rattling occuring when i let the clutch go low rpm.

clutch in and its gone.
at higher revs 'sometimes' rattle can be heard.

[bennjamin]

figure it out? i think its the same problem with mine,
recently got the clutch changed + upgraded
heatshield replace and flywheel machined.

and there's a rattling occuring when i let the clutch go low rpm.

clutch in and its gone.
at higher revs 'sometimes' rattle can be heard.

since its happened since your install , it would be directly related TO the install. Something is not tight or not properly lubricated.

could be loose heatshield....check that one out.
IF not , take it back to your mech asap.

[jesmine0]

I got the very similar problem since 3 weeks ago. I got the stock engine and gearbox. When the car is sitting and without revving, it making funny noise. Once the clutch is pressed, the sound will gone. But, when you start to drive over 2500 rpm or 3000 rpm, the sound is coming back again. It just so annoying.

What I do is, pressing the clutch at the red light!! So other driver wouldn't keep looking to me!! the sound is soo loud!!

I bring the car to shop last week and had it checked. They say it properly be the problem of bearing in the gearbox. They ask me to get gearbox specialist checked. But i am just too lazy to get it checked again!!