Page 1 of 2 12 LastLast
Results 1 to 12 of 20
  1. #1
    Member Array
    Join Date
    Aug 2003
    Location
    Canb-Melb-Syd
    Car:
    Long history

    Oil seals on B series (b16)

    Basically losing oil, i think timing belt side (hard to tell where it is coming from).


    Basically will be doing the timing belt soon anyway so thought i would replace all the oil seals that i can. Just need to make a list and need some help.

    here is what i have so far:
    Sump gasket
    Crank Seal
    Cam seals on timing belt side (do these get done? what about those golden eagle cam seals, are they on the timing belt or dizzy side)?
    Oil pump (do these have a rubber seal? easy to swap? or is it just honda bond.. if so, what seals are needed for this)

    any other suggestions?
    I will also do the two on the vtec solenoid, because they are leaking.


  2. #2
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    rocker cover gasket?
    Spark plug gaskets

    Why not buy a complete overhaul kit and then sell the bits you don't want.
    They aren't that expensive, i brought one a while back from the states.
    Evo IX - THE FINAL EVOLUTION

  3. #3
    Member Array
    Join Date
    Aug 2003
    Location
    Canb-Melb-Syd
    Car:
    Long history
    i guess you are talking about the NON OEM ones.. just aftermarket non honda ones?


  4. #4
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    yeah there are some good ones around, can't rem the brand now.
    Honda charges a fortune for their kits
    Evo IX - THE FINAL EVOLUTION

  5. #5
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    yeah i got me a these sets.. it was like under AU$50 delivered for both:
    http://cgi.ebay.com/ebaymotors/ws/eB...240567890&rd=1
    Oil pan gasket
    Front oil seal
    Rear main seal
    Other o-rings / seals.

    http://cgi.ebay.com/ebaymotors/ws/eB...249281968&rd=1
    Valve cover gasket
    spark plug tube seals
    grommets


    As for the dizzy side cam seal, either re-use it and coat it with sealant or get any of the triple o-ring ones fromt here too.. real cheap.
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  6. #6
    Member Array
    Join Date
    Aug 2003
    Location
    Canb-Melb-Syd
    Car:
    Long history
    i think i might actually go OEM bottom gasket kit
    and get some cam seals between the cam and cam gears

    a metal ringed cam seal too



    so what seals the oil pump?
    just O rings and honda bond?


  7. #7
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    Dsp - that's the ones i got also
    Evo IX - THE FINAL EVOLUTION

  8. #8
    Yonas sells VRS seal kits aswell

  9. #9
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    Quote Originally Posted by Limbo View Post
    Dsp - that's the ones i got also
    lol.. he's the only one that combine ships.
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  10. #10
    Member Array
    Join Date
    Mar 2008
    Car:
    92 Legend, 92 Civic
    is the oil pump in the sump on those?

  11. #11
    Member Array
    Join Date
    Sep 2006
    Car:
    CRX SiR turbo
    Quote Originally Posted by Dxs View Post
    so what seals the oil pump?
    just O rings and honda bond?
    it should be a big O ring seal. had to do mine when i went boost. not sure how to remove it tho.

    try cleaning up the engine and driving for abit to see where its leaking from. when i thought i was having all those sump probs, it turned out to be the oil pump cos it just above it and you cant really see between the oil pump and the sump its hard to miss the leak.
    Last edited by Limo; 15-06-2008 at 04:34 AM.

  12. #12
    Member Array
    Join Date
    Feb 2008
    Location
    Melbourne
    Car:
    EG brusier, STi type R
    Guys my B18CR is leaking from the passenger side, as it appears and as I've been advised its from the main seal. Is this a common problem? Is it expensive to get this seal replaced? Motor is in EG HB.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.