HID HB4 kit

[TRUMAN]

will be takin pics of actual setup on my car after dinner time and should be on after 9pm

[iversonruls]

don't give him false information

he can't plug it in, how can he turn it on???

hes got a h4 plug, instead of a hb4

he said he did the setup as shown in the pic -.-

should be able to plug in rite?

false info huh?

[TRUMAN]

lol.. theres no false info from u iversonruls lol... but heres the pic of my setup as like the pic i showed previously. its in three parts going up to the end of the ballast lol







so chances of it being faulty kit? theres nothing wrong with the oem harness coz wen i put in back stock bulb it works fine =)

[iversonruls]

hmmm since a set of hid comes with 2 ballast n bulbs

hv u try the other 2?

[TRUMAN]

Nods his head.. yep tried both...

[iversonruls]

everything looks fine...
but weird.. both ballast faulty..hmmmm

are those 35w hids?

[TRUMAN]

yea theyre 35w.. soo if its likely to be faulty ill see if i can get an exhange

[bungsai]

are you 100% they are plugged in correctly

you really have to push the connecter from the ballast to the OEM plug really hard sometimes.

my old kit in my dc2 was a beyoch.

[TBS33N]

You have to have both sides hooked up otherwise their will not be a complete circuit! it happened to mine. as soon as i had both plugged in it worked.

[TRUMAN]

Both aLL in and still no work.. and i pushed all connectors in very very very hard.... and still no work.. =( and my fuse is ok.. works fine. fuse for the headlights

[TRUMAN]

tho would this kit still require a harness????

[TRUMAN]

ok guys, i mite try this setup with the harness that wrongly came with the kit... maybe this mite work.. here are the pic set up in order... hopefully its understandable.


so circles there will be one part ground wire to chassis and other to oem harness. The X means im leaving out because if u look carefully the circle that will connect with the oem harness seems to be one same wire?


this is just a continuation of the wiring , the X im leaving out because i dont tink i would have any use for it


so this is the middle of the setup, circle will go to battery and the X is suppose to be the connecting thingy into the H4 harness??


and this is the same as the left side of the setup, vice versa..

wat u guys think of this setup? i mite then work??? or maybe i just need to get a HB4 loom/harness from the seller?