Audio/Video Installation

**AusAccord** · 21-07-2008 09:09 PM

can anyone recommend a good a/v installer in Sydney. my plan is using stock hu, front high output tap for small subwoofer and rear tap for another satellite speakers at the rear. carpc connect to a touch screen then hard wire to AUX in for hu. need customize stock display to fit in 2 din center console with screen. a reverse camera connect to mirror with display and auto detect function. have most of the parts already except the screen and reverse camera. btw, car for the above system is an Odyssey. tks in advance

**aka_NSX** · 21-07-2008 09:46 PM

GOOD INSTALLER is NOT CHEAP, so if money is no problem you can contact ICACHA . . . he is

**AusAccord** · 21-07-2008 09:50 PM

tks mugen odyssey (love yr grill too much)

, so what's the figure around if need to be done?

**aka_NSX** · 22-07-2008 08:47 AM

its very hard to say, the hardest part is to customise the center panel to fit the 6.5"-7" screen, coz I still cant think how can you still can keep the oem display, coz what I have done to mine before I just use a single din flip screen one then connect to the AUX so I can still keep my oem display, I think the best is to talk to him . . .but roughly it will cost at least $1000 to install all the stuff you have mentioned

why dont you just do it like mine now just buy the double din oem center panel so you can install the 7" screen

before:

after:

**AusAccord** · 22-07-2008 01:28 PM

yeah, got the JDM 2 din center console as yrs already and try to fit the oem display (got a spare one) on top of screen (just underneath the top lip cover or choose smaller screen). its only my idea and not sure if workable. choose that way is try to keep it clean for two separate system as my finance controller will not use the carpc while she is driving and don't want to receive any complaints

**CER-15E** · 22-07-2008 09:18 PM

contact Sergei at Northwest Customs.. located in Castle Hill... he has the best quality work... he can do any installation.. any custom work.. for both interior, exterior, systems.. everything and anything you could need and want.. pm me if you want his number of visit... www.northwestcustoms.com.au to see some of his work...

**ICACHA** · 23-07-2008 08:26 AM

i like using chipboard screws too to hold speakers in

**rahul** · 23-07-2008 10:05 PM

go to FHRX studios in caringbah, highly recommend marty.

**Audio Express** · 31-07-2008 08:25 PM

Originally Posted by ICACHA

i like using chipboard screws too to hold speakers in

are you serious??

I know who you are having a shot at and after talking to Giovanni It makes me wonder.

**ICACHA** · 03-08-2008 09:12 PM

ke?

me, no... images ive seen in australian audio and 4 cylinder car magazines show quite clearly nice gold chip board screws holding in speakers, black would do me nicely thou