Results 1 to 12 of 12
  1. #1
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S

    Angel eyes for dc2 integra

    I'm looking at a pair of angel eye projector headlights off ebay. Has anyone done this and will there be any compatibility issues with the wiring or anything like that?

    the link to them is:

    http://cgi.ebay.com/ebaymotors/94-97...spagenameZWDVW

    any ideas?

  2. #2
    hey mate, awesome looking headlights!!

    when i got the same sorta setup for my accord i noticed that they had different bulbs? not hard to rewire tho just make sure you disconnect the negative i ble so many fuses and had no idea why it wasn't working!!

    as for the angle eyes,just cut the old plugs off and rewire them to the angel eyes (make sure to leave some line on the old socket in case you want to change over!)

    hope this helps!

  3. #3
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S
    Quote Originally Posted by zorann View Post
    hey mate, awesome looking headlights!!

    when i got the same sorta setup for my accord i noticed that they had different bulbs? not hard to rewire tho just make sure you disconnect the negative i ble so many fuses and had no idea why it wasn't working!!

    as for the angle eyes,just cut the old plugs off and rewire them to the angel eyes (make sure to leave some line on the old socket in case you want to change over!)

    hope this helps!
    thanks a bunch mate, i was prepared for different bulbs i just didnt want endless wiring problems

  4. #4
    nah should not be hard at all!!,

    just put connectors on it so if you ever need to change you can just plug and play!!

  5. #5
    hey mate, dont want to sound negative but i think all that aftermarket stuff ( glitz & glamour stuff im refering to ) is all cheap crap, i put a set of led tail lights in and they'd fog up when it rained, i had to seal it all with silicon which was a pain cos the moisture in there already corroded the housing and made it look stained inside... all up paid $200 or so and then went back to standard after, they always say " as good, or better than oem quality " but there not. same with front lights, my mates EK had the same problem and changed back to standard... as good as they look there not made very well. up to you though...

  6. #6
    Account Disabled Array
    Join Date
    Apr 2008
    yeah thats happened with my rear tail lights on my dc2 they fog up when rain or i wash it at car wash probly change back to standard soon!

  7. #7
    yeah its f%&ked huh.... same with the honda badges you get, ( the red, yellow ones etc ) water gets in there and they look shite, too much for oem badges though had 1 set on my car when i bought it a someone badged it... not worth havin good gear on your car these days.....

  8. #8
    Member Array
    Join Date
    Sep 2007
    Location
    Campbelltown
    Car:
    Dc2r/EG
    how much would you pay for those?i never even knew they made them for dc2rs:S

  9. #9
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S
    Quote Originally Posted by we tec View Post
    hey mate, dont want to sound negative but i think all that aftermarket stuff ( glitz & glamour stuff im refering to ) is all cheap crap, i put a set of led tail lights in and they'd fog up when it rained, i had to seal it all with silicon which was a pain cos the moisture in there already corroded the housing and made it look stained inside... all up paid $200 or so and then went back to standard after, they always say " as good, or better than oem quality " but there not. same with front lights, my mates EK had the same problem and changed back to standard... as good as they look there not made very well. up to you though...
    yeah im abit dubious about them too. its always cheaps crap. i did some reading and people report failing LED halo rings and yellowing projector housings and all sorts of problems.

    porbably best to stick with the blessings of brilliantly made honda OEM gear.

    i still do love the look though.. anyone done this and got pics? any troubles?

  10. #10
    Member Array
    Join Date
    Dec 2004
    Location
    syd
    Car:
    94 integra VTiR on bags
    I have the angel eyes on my dc2 and they have been good for the past year! They were no problem to install as long as you can take the front bar off. Mine also still use hb4 globes, so you might wanna check out some other sellers before you buy.

  11. #11
    Member Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    GD3 Fit
    do they make this for the rectangle jdm style head lights?
    plusplusplus
    gd3fit

  12. #12
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S
    Quote Originally Posted by kyobi View Post
    do they make this for the rectangle jdm style head lights?
    yeah they do have a look on ebay.. they look pretty good too

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.