|DIY| EK9 taillights for $$10

[Bludger]

sorry for thread revival peeps... just need a little help... LoL

I did these lights.. tested it before i soldered.. everything went fine.. after i soldered the wires, the brake lights don't turn on unless the brakes are applied.. and that's what headlights on too.. i tried red-red, green-green and red-green.. what am i doing wrong?..

if everything went fine b4 you soldiered it, you must have soldiered it wrong, cos nothing will change between testing and soldiering. unless you changed something.

I mean, common, pretty hard to **** up 3 wires.

you must be an ABV

FOB viets are resourceful and won't be asking the sort of questions that you just asked

lol