Toda C on stock b18c7

**delsol9000rpms** · 25-08-2008 03:13 PM

ok were did that come from...

first off all that was the lowest mph of the night... and no a ek4 cant run that mph with full inteior and full tank of fuell.. if you have a stock ek4 ill pay for yu to run at wsid if youy can run tose times and that mph...

thats not rev limiter thats launch control on the launch??... 5.5krpm... on 16x7 inch rims... tyres were pretty shit though.....

if your talking about the burnout i dnt hear you flaming yonas from jdmyard for his limiter burnouts..?? i never ever ever do burnouts in my car on the street...

no i wnt pop a valve thanks mate ive got a good tune by toda and he put the motor together and a toda timing belt.... so i think i will keep all 16 of my valves thanks...

as for a gutless midrange... pffftt matee nws i spun off the launch and i was on and off the throttle untill you hear it again.. you cant hear it coz of the sss turbo in that video..
dsp26 has those buddyclub cams that are supposed to have the ultimate midrangee... i have around 10kws more then he does midrange.... ill get a dyno sheet next time i go to toda and ILL post it up gladly im not flaming him im just using his car as an example...

believe whatever you want... i have nuthing to proove to you... next time i go out there ill be more prepared and more setup... if you happen to be there i will gladdy race your eg b16a.. you talk so big over the net but keep goingg its not gonna get you anywere...

how about you continue building your backyard eg's and shutup

**Elwood** · 25-08-2008 04:18 PM

Originally Posted by delsol9000rpms

how about you continue building your backyard eg's and shutup

Oh no he didn't!~!~!~!@~!#!#BBQ

**TODA AU** · 25-08-2008 04:47 PM

**Elwood** · 25-08-2008 04:54 PM

I have a feeling this will turn into another circuit v. 1/4 mile debate..

**Benson** · 25-08-2008 05:22 PM

Originally Posted by delsol9000rpms

ok were did that come from...

first off all that was the lowest mph of the night... and no a ek4 cant run that mph with full inteior and full tank of fuell.. if you have a stock ek4 ill pay for yu to run at wsid if youy can run tose times and that mph...

thats not rev limiter thats launch control on the launch??... 5.5krpm... on 16x7 inch rims... tyres were pretty shit though.....

if your talking about the burnout i dnt hear you flaming yonas from jdmyard for his limiter burnouts..?? i never ever ever do burnouts in my car on the street...

no i wnt pop a valve thanks mate ive got a good tune by toda and he put the motor together and a toda timing belt.... so i think i will keep all 16 of my valves thanks...

as for a gutless midrange... pffftt matee nws i spun off the launch and i was on and off the throttle untill you hear it again.. you cant hear it coz of the sss turbo in that video..
dsp26 has those buddyclub cams that are supposed to have the ultimate midrangee... i have around 10kws more then he does midrange.... ill get a dyno sheet next time i go to toda and ILL post it up gladly im not flaming him im just using his car as an example...

believe whatever you want... i have nuthing to proove to you... next time i go out there ill be more prepared and more setup... if you happen to be there i will gladdy race your eg b16a.. you talk so big over the net but keep goingg its not gonna get you anywere...

how about you continue building your backyard eg's and shutup

Yeh funny that, our backyard b16a will smash your car down the 1/4 mile..its already achieve 13.9@97mph running stock ITR cams before the last session of tuning. the motor was built in less than 1hour

Umm i only used a ek4 as an example cause i have one and i've ran down the 1/4 already mate... 93mph with some bolt-ons stock internally motor..

dsp26 car was on the dyno on the weekend and i was there to witness the tune. He is coming out this wed from what i heard, so maybe you can make an appearance and line him up?..

Mate, i dont talk big and not know nothing... if i do then im just a sad ****. Mate i think half the people on this forum agree's with me. They jsut dont say nothing, but behind there keyboard they are laughing at you mate

Maybe you shouldn't be too narrow minded and face the facts... there are heaps more better products out there for a b16a motor.. Im not dissing Toda products, there awesome products but there only good in certain applications.

**bennjamin** · 25-08-2008 05:37 PM

guys please keep this on topic. Keep the aggression out of Ozhonda thanks.
But lets keep this discussion going !

**Benson** · 25-08-2008 05:40 PM

........

**bennjamin** · 25-08-2008 05:41 PM

Originally Posted by Benson

........

my thoughts on this as a bystander of this thread....

No

Honda made the cams for the b18c7 just fine

**jdmTYPE R** · 25-08-2008 07:52 PM

Originally Posted by TODA AU

OVERDOSE for sure JK

**delsol9000rpms** · 26-08-2008 01:34 AM

Originally Posted by Benson

Yeh funny that, our backyard b16a will smash your car down the 1/4 mile..its already achieve 13.9@97mph running stock ITR cams before the last session of tuning. the motor was built in less than 1hour

Umm i only used a ek4 as an example cause i have one and i've ran down the 1/4 already mate... 93mph with some bolt-ons stock internally motor..

dsp26 car was on the dyno on the weekend and i was there to witness the tune. He is coming out this wed from what i heard, so maybe you can make an appearance and line him up?..

Mate, i dont talk big and not know nothing... if i do then im just a sad ****. Mate i think half the people on this forum agree's with me. They jsut dont say nothing, but behind there keyboard they are laughing at you mate

Maybe you shouldn't be too narrow minded and face the facts... there are heaps more better products out there for a b16a motor.. Im not dissing Toda products, there awesome products but there only good in certain applications.

y everytime i say something you and you little followers have to disagree with me... just dnt reply to anything i sayy i have nothing to proove to you as i said.. i know what my car is capable of... i wanted more power from it for my own good not for anybody else to say if there setup is better or not coz i really dnt giv a F**K.... you can do what ever you want.... you dnt see me talking shit about you or your cars... so y the need to say shit about my car..?

the other week i saw your eg b16a run a 14.3... so what was the excuse there ayy how cum you didnt run 13.9 then?? ayy? theres reason for everything for all i knoww... but you dnt see me saying shit to you...

im happy with the toda spec c's on my motor and if you asked me would i changee id say no becoz they do eeverything i want plus more...

as for dsp26.... good luck to the guy never once have i doubted him or flamed him i only ever suggested stuff to him... i hope he runs an 11 second pass... doesnt bother me.... i wnt be racing this wednesday... simple... i wnt go back till i have fixed my problems of traction off the launch... everything else is spot on..