power window conversion

**zco** · 09-07-2007 07:40 PM

I have an EK and looking to do power window conversion

question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?

**Kiz_EG6** · 10-07-2007 01:05 PM

Originally Posted by zco

I have an EK and looking to do power window conversion

question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?

Let me ask... what EK came without power windows?!?

**fatboyz39** · 10-07-2007 01:07 PM

Originally Posted by Kiz_EG6

Let me ask... what EK came without power windows?!?

EK CXi

**STOCK** · 11-07-2007 04:59 PM

the eg/dc use different regulators to the ek so unless you want to do some crazy hacking and modding no

**BlitZ** · 14-07-2007 11:09 PM

fark power windows.. weighs the car down...

lexan or a simple net would be good for your daily

**MWAKU** · 15-09-2008 05:25 PM

bump for this.

how 2 do and how much.,!

**trism** · 15-09-2008 05:42 PM

go to a wrecker and find a car with it.

get doors

swap doors

doneski

**MikeyG** · 15-09-2008 05:53 PM

trism... dude not that simple... u gotta get hte harness and wiring.. then connect to the battery then go thru the fenders then thru the door then connecting to the fuse box or if u got a 4 door then ur more fukd wif stripping the whole car down and wiring all the ova the joint! GG 4DLULZZ

**90LAN** · 15-09-2008 06:12 PM

buy two doors complete with power options then run new wiring and regulators
it cost me 400 for two doors and 100 labour so 500 all up
i did this on a eg thou it also had the power mirror option too
this is the best way with less hassles

**MikeyG** · 15-09-2008 06:19 PM

did u take it to an car electrican to do this lan?

casue u do it urself with ur existing door.. all u need is the next model above with power windows options..

EG. zco has a cxi i believe.. so grab the trims off a gli and regulator and wiring and switchs from it aswell.. and go from there.. not a simple thing to do but can save u money

**90LAN** · 15-09-2008 06:26 PM

i took it to my mates place
it is a pain to put power regulators/etc in door
just get complete ones

**trism** · 15-09-2008 06:27 PM

Originally Posted by MikeyG

trism... dude not that simple... u gotta get hte harness and wiring.. then connect to the battery then go thru the fenders then thru the door then connecting to the fuse box or if u got a 4 door then ur more fukd wif stripping the whole car down and wiring all the ova the joint! GG 4DLULZZ

hahahah i know i was being a tool lol