Central locking and door switch problem

[philBo]

hey guys just wanted to get an idea how easy it is to replace the door switch on an em1. not the door handle but the switch that locks/unlocks the door. mine snapped tonight for some reason when i tried to open it.

basically because my actuator is also fkd i cant open the door from the inside. LOL. when i lock or open the door from the outside using my key, i hear a grunting/grinding kind of sound. is this related to a dead actuator?

using xposed's pic for a reference. (the switch is just before the handle)

[DC5TYPER]

The lock is mechanical connected to the electric actuator. If the actuator is causing a resistance you will need to replace it or disconnect it.

You will need to remove the door trim to do this.

Hope this helps.

[philBo]

^thanks val

[AE092]

car audio/alarm installers should have actuator kits readily available. If your handy at DIY's then it should be a matter of taking of door trims and replacing the units.

I got my friend to do it for me. Are you around the Clayton/springy area? If so i can recommend you where

[Zdster]

Pretty straight forward Phil. Drop me a PM if you need a hand.

[grncivic03]

if you do it yourself, do not take the plastic covering that is glued to the door. I did and now i can hear alot of road noise inside the car.