[cl9] extractors question

[snYpz]

^ Not a bad price at all. I wonder if you getting the hissing like with the Toda.
With the gains with racing headers, its looks like a very worthwhile mod. Im just not keen on increasing noise levels.

[Euro08Jaz]

No worries, I will do a before and after dyno then post the results. Probably won't be for a couple of weeks through as that's the earliest I could get my car booked in to do the work.

I paid $1225 delivered to my doorstep from JDMConcept.

that would be great, thankyou

[BusterSonic12]

The price of the J's Racing Header still the same!? It was $12xx as well... howcome... I beg it will be an awesome header since J's racing always have high quality product!!

[JunYu]

I dreamt that the toda headers arrived at my door today. LOL

anyway, glad someone here picked up the j'srcaing, saw it on ebay for quite some time now.!! can't wait to see the gains.

[MangChi]

i think i will wait till our exchange rate improves before buying more parts. = [
wanted headers so bad but exchange rate is a dog

[tsx604]

Toda is great but I didn't want to wait until the dollar picks up, not sure how long that will take. So I've just purchased the J's Racing header from JDMConcept and I'll post my thoughts around quality, installation and performance when it's installed. There are some modifications to make for it to fit the CL9 but I have a good place here in Perth to do the work. I also have the J's Test Pipe on the way as well. The header didn't come with that.

My local shop has installed 2 J's CL7 header on 2 CL9s. It is not really a direct fit and it took them 3 hrs banging on the subframe to get it fit. Just a heads up for what you should be expecting to install the J's header on a CL9. Good luck and please post a review on it.

[aaronng]

My local shop has installed 2 J's CL7 header on 2 CL9s. It is not really a direct fit and it took them 3 hrs banging on the subframe to get it fit. Just a heads up for what you should be expecting to install the J's header on a CL9. Good luck and please post a review on it.

That's odd, the CL7 header should fit the CL9 without needed to bang out the subframe. Usually it is the DC5 header that requires some CL9 banging.

[EUR003act]

That's odd, the CL7 header should fit the CL9 without needed to bang out the subframe. Usually it is the DC5 header that requires some CL9 banging.

could it be because of the 19.7mm deck height difference between the K24 and K20?

that would mean the extractors would sit higher...

[tony1234]

That's BS.You shouldn't have to pay $1200+ and then have to beat the shit out of the subframe to make the headers fit???

[aaronng]

could it be because of the 19.7mm deck height difference between the K24 and K20?

that would mean the extractors would sit higher...

If that was true, then the Toda and Maxim headers would also have the same problem and needs the subframe to be banged out.

[Crapdaz]

doesn't sound good.....

and from akina's install he didn't need to bang anything.

[EUR003act]

If that was true, then the Toda and Maxim headers would also have the same problem and needs the subframe to be banged out.

unless on the CL7 the TODA/Maxim headers sit lower under the subframe?