Good Honda Workshops

**Rowie** · 28-08-2003 04:37 PM

hey guys.

I am looking around for a good honda engine builder / reconditioner / and fitter.

At the moment I have a civic with the D15 twin carb engine. I am looking at simply buying a reconditioned 1.5L engine to replace the current one, and I want it to be EFI not carby.

If anyone could post some details for anyone in sydney or hunter areas that do these engine installs that would be great.

**wynode** · 28-08-2003 05:29 PM

Try Robert at Hannys performance in smithfield

PH: 97255115 in Smithfield.

As long as its not a 'performance modification' he might do it.

Whats wrong with the current one? or do you just want EFI?

**Rowie** · 28-08-2003 05:45 PM

the engine is getting tired and blowing smoke. its due for a rebuild, so i want to simply get a reconditioned engine with EFI.

I am not spending too much money on the civic, just enough to make it last and get me around at this stage.

**dc2r** · 03-09-2003 02:47 PM

Yes, Hanny's in Smithfield.
Ask him to put in a B18C!

**Setanta** · 03-09-2003 06:12 PM

LOL @ asking Robbie to drop performance mods and engines in - ask at your peril

**revolution** · 04-09-2003 06:31 PM

Last time I went to him to lower my car he did it....but then afterwards one of the other guys was complainging it was too low...lol

**Jnr Teggy** · 04-09-2003 07:04 PM

hannys or good performance

**ALLMTR** · 04-09-2003 11:32 PM

See Charlie Good performance him make quick better

anyone that has met Charlie will understand :wink:

**Rowie** · 04-09-2003 11:56 PM

thx for the info guys.

do either of these guys have a website?>

**Setanta** · 05-09-2003 07:48 AM

LOL @ Charlie-speak

Robbie doesn't - but if you are outside his shop on a Saturday morning, you'll see why he doesn't. Word of mouth and the place is a Honda Mecca

I dropped a replacement D15 into an old GL I had for 800 bucks - Honbits organised it.

The D15 didn't have EFi in Australia or Japan, only the single-point Fi in the US. Get a D16 varient - but be prepared to track down the ancilleries/ECU/wiring loom.

Cheers