17" 225/45/17 offset+45 would these fit a accord??

[Mikes_DC5R]

hey guys,

selling my rims and a mate ask me would my rims fit his car??

there OZ racing Superleggera, super light racing rims

detail:
225/45/17
offset +45
114.3x5 stud pattern

would these fit on a Honda Accord 6th Gen 2000 model??

your help is much appreciated

[Chi]

I am pretty sure it should be fine.

Stock offset of the CL9 is +50.

And the later models run 215 tyres.

So Im sure it shoudl have some room to fit that spec of wheel in.

*waits for Aarong to correct*

[SiReal]

depends on what model his accord is.

if v6, then 5x114.3. stock offset is +55, 15x6.5 so yes, should be ok but chances of scrubbing if slammed. but camber should solve that issue.,

if 4cyl, then no chance as that is 4x114.3

i have 17x7 +53 on same tyre specs with an anti camber kit in the rear. no scrubbing due to the higher offset.

[Mikes_DC5R]

depends on what model his accord is.

if v6, then 5x114.3. stock offset is +55, 15x6.5 so yes, should be ok but chances of scrubbing if slammed. but camber should solve that issue.,

if 4cyl, then no chance as that is 4x114.3

i have 17x7 +53 on same tyre specs with an anti camber kit in the rear. no scrubbing due to the higher offset.

thanks for the advice,

so he'll pretty much get scrubbing? wonder where and how much camber kits are. his car is stock, beside CAI so i doubt it will scrub at all

[4p1ay]

hes talking about ride height not really mods.. ie is it lowered at all..

[Mikes_DC5R]

hes talking about ride height not really mods.. ie is it lowered at all..

nope completely stock suspensions.. umm will DC5R stock suspension fit a 2000 accord v6???

i doubt it... lol

[[ IV 23 VI ]]

Maybe not without machining them,

I have the 04 Accord V6 with 20x8.5 +45 and they did not fit width way,
Although I did have to have them machine 3mm off at the wheel shop.
As they hanged out nearly 1 inch.
And now they are beautiful.

Hope this helps buddy.