ORC Clutch and Flywheel

[Accord Basic]

Hi guys,

how much do you think for install a ORC clutch kit, LSD and Final Drive on euro? I just look at the manual, it is very big works for removing a gearbox. do you know faster way (safe method). Can it DIY?
Thanks

[aaronng]

Hi guys,

how much do you think for install a ORC clutch kit, LSD and Final Drive on euro? I just look at the manual, it is very big works for removing a gearbox. do you know faster way (safe method). Can it DIY?
Thanks

I'm guessing around $1000 or more. Have you called Hanny's for a quote?

And no, I don't recommend that you DIY.

[Accord Basic]

Thanks
Is Hanny's a workshop in Perth? I am located in Perth. just purchased the clutch kit. thinking to have LSD and Final drive install at the same time. which brand of Final drive and what ratio do you recommend for euro? I found a LSD on ebay, do you think is a good buy? link below
http://cgi.ebay.com/ebaymotors/JDM-H...1%7C240%3A1318

[Suntzu]

I got quoted about $680 for Clutch and Flywheel in canberra which i thought was decent. Dunno ho much the LSD adds but i would do this at the same time.

i just don know what LSD to get and how.

[aaronng]

Thanks
Is Hanny's a workshop in Perth? I am located in Perth. just purchased the clutch kit. thinking to have LSD and Final drive install at the same time. which brand of Final drive and what ratio do you recommend for euro? I found a LSD on ebay, do you think is a good buy? link below
http://cgi.ebay.com/ebaymotors/JDM-H...1%7C240%3A1318

Oops, didn't notice you were in Perth. Hannys is in Sydney. I recommend that you search the where to buy section and post in there if you can't find anything.

[aaronng]

I got quoted about $680 for Clutch and Flywheel in canberra which i thought was decent. Dunno ho much the LSD adds but i would do this at the same time.

i just don know what LSD to get and how.

Your choices if you want torsen is only Honda OEM, Quaife or the new Wavetrac.

[Accord Basic]

I found a LSD with speed gear, and other LSD without speed gear. does anyone know which LSD can fit on CL9? do I need the speed gear? Link below

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

[aaronng]

I found a LSD with speed gear, and other LSD without speed gear. does anyone know which LSD can fit on CL9? do I need the speed gear? Link below

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

Both fit. If it is the same price, then get it with the gear. Otherwise, you don't need it. Mine didn't have it. I just reused the one that was bolted to my open diff.

[Suntzu]

Whats the OBX LSD like ? Im hearing good and bad...hmm

[Accord Basic]

do you think the price is worth to buy? someone sell the same LSD for AUD 650 before and the ebay selling 760 + shipping = 870. Please advise. I also got a quote for Cusco 1.5 way LSD (brand new) for AUD 1500 + shipping may be about $1800 in total.
Which one is better?

[aaronng]

do you think the price is worth to buy? someone sell the same LSD for AUD 650 before and the ebay selling 760 + shipping = 870. Please advise. I also got a quote for Cusco 1.5 way LSD (brand new) for AUD 1500 + shipping may be about $1800 in total.
Which one is better?

Check the condition of the $650 LSD. If it is good, then get that as it is cheaper than $870 (which is also used anyway).

Cusco 1.5 is a different type of LSD. It is not a mechanical LSD like the Honda/OBX. It will need different transmission fluid and changing of the clutch plates at regular intervals. Easy on a RWD but a bitch to do on a FWD.

[Accord Basic]

Thanks, I have heard the clutch type LSD required to change oil more often.

Hi all need an advise.
do you think is it good to have a used TSX final drive (4.764) on CL9? other option for me is to buy a new set of spoon FD (5.1) or Mfactory FD (5.48?).
The most expensive is the Mfactory, over a thousand shipped. Spoon is about 780 and the used TSX cost 400.

what you guys think?
Thanks