Creaking clutch pedal [Euro]

[bmwbadboy]

I have an 06 model and the clutch creaks. Don't know the cause.

[tony1234]

Sorry to bring up an old thread but my clutch pedal has been creaking for the last three months and is getting to me...

I have a 03euro and the warantee is out. I have lubed it numerous times but the problem comes back in 2-3 days.

I have filtered through most of the previous 39pages and it seems to be happening on most 03-05 models. I have got a quote for a 03 master cylinder for $190, can anyone confirm that their 06+ euro clutch pedal doesnt make this creaking noise? Im thinking of exploring the option of buying a 06+ master cylinder (if it is the same).

Is this price($190)new from Honda spares?As far as i know Master cylinder is same for 03-08.I have an 06 47000km and no creaking.

[bennjamin]

have you euro guys checked the SLAVE cylinder yet ? it can be dry from lack of lubricant and give a few different noise and or feeling symptoms.

[power_of_dreams]

so what is the best way to describe in tech terms to get it fixed under warranty? Creaking clutch caused by lack of lube on master cylinder?

BS problem is coming back again!

[aaronng]

Just tell them your clutch is creaking and ask them to check it out.

[EuroAccord13]

Or resign yourself to regular lubrication with Silicon grease...
I've gone through 3 master cylinders via warranty and I'm still getting the problem, was a 3P manufacturing defect.

[burak213]

so were do i apply the silicone grease to?

on the CMC or the spring?

[aaronng]

so were do i apply the silicone grease to?

on the CMC or the spring?

I use silicone spray on the CMC. Try not to spray too much because clutch fluid doesn't go well with silicone.

[Sir_vtec]

I used valvoline multi-purpose grease and applied it on the folk of the gearbox where the slave cylinder is and..... it stopped it.

[aaronng]

I used valvoline multi-purpose grease and applied it on the folk of the gearbox where the slave cylinder is and..... it stopped it.

Yup, that can happen too. Listen to where the noise comes from. I also did the same as you using high temp lithium grease, where the slave cylinder pin pushes onto the clutch release fork.

[burak213]

thanks aaron, i did it, didnt really help so i booked it in for service, i just hope they replace it instead of lubing it up again

[xxb4xx]

Hey guys, sorry to dig this up,

I have the exact same issue, and it drives me nuts,

Clutch works fine, it feels like the spring is the cause as it sounds like kicking an old bed when you press it down,

Is it hard to get to the clutch spring? and how much would a clutch spring be from Honda?

In regards to the slave and master cylinder lube, where are you guys spraying silicon spray? i'd prob use lithium grease also..

Cheers
Brendan