pull your rear seat up to unclip it
then you can find a 12mm bolt directed at the door which holds the rear side seat panels undo that and pull the panel up towards the windscreen so it unclips
then you can access the rear strut tower nuts to unscrew them
wait what do u mean by pull the rear seat up?
like the part where u sit on or the part where u lean on?
and i dont have to take out my whole seat yeah? just the side panels?
Press the edge of the seat down (Where it meets the door) and you will see a 10mm bolt, undo the bolt and remove the side bolster, you will see the suspension mount. The space is a bit tight but you'll manage.
Once you unclip the base of the seat lift it as high and you can see a 10mm bolt on the side undo that to remove the side seat panels and thats all you need to do it is a bit tight but thats how me and my mate did it.
Just need a ring torque wrench/spanner to undo the strut nuts, just under the parcel shelf plastic section behind the head rests.
Bookmarks