|
-
turbo manifold???
hey every1,
you probably know my setup by now... and i just needed feedback on this item i found on ebay????
http://cgi.ebay.com.au/Turbo-Manifold-for-92-95-Honda-Civic-with-D16-Engine_W0QQitemZ170275123845QQcmdZViewItem?hash=it em170275123845&_trksid=p3286.c0.m14&_trkparms=66%3 A2|65%3A1|39%3A1|240%3A1318[/URL]...
what are your thoughts, and any suggestions???
yes or no
"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
-
NO!!!!!! U get what u pay for.
Ebay manifolds are cheap and shit, so are the kits u find on there as well. stay away
rather see u spend your money on quality
-
As said, you get what you pay for. I would never get it.
And the wastegate placement is very poor.
Deano. 
-
 Originally Posted by Riced_Civic
NO!!!!!! U get what u pay for.
Ebay manifolds are cheap and shit, so are the kits u find on there as well. stay away
rather see u spend your money on quality
Originally Posted by DLO01
As said, you get what you pay for. I would never get it.
And the wastegate placement is very poor.
thanks buddies, then the question is where do go to get one remade at a good price???
"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
-
try this for a read on manifolds, give you an idea of what is out there and a rough price range
http://www.team-integra.net/forum/di...g+Common+Topic
Evo IX - THE FINAL EVOLUTION
-
Originally Posted by Limbo
thanks big help
"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
-
I've had big problems with Ram horn style manifolds. My first one was a ebay one which fell apart after 3 months. then i had a custom one made up in replica of the ebay one which lasted bit over 6 months which i repaired and then failed after another 6 months.
I then purchased one of these below and i havent had a peep out of it since i got it and its been well over a year.
Get a good mani and you wont regret the money spent.
-
its booked in to receive a new transplant. custom making one out of steam pipe for around 1200 not sure if thats good: any thoughts...
"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
-
i totally agree with FastFWD  i bought a full race manifold, Has a LIFETIME warranty and the have AWSOME customer service... AND give great gains! problem is, u MAY have to get a new turbo, and dump pipe...
 Power Of Dreams...
VTECN
-
Ive seen the full race manifold on another setup, same turbo different waste gate setup though...
"If there is no struggle, there is no progress. Those who profess to favor freedom, and deprecate agitation, are men who want crops without plowing up the ground, they want rain without thunder and lightning.”
-
You get what you pay for, full stop.
Originally Posted by myztery
its booked in to receive a new transplant. custom making one out of steam pipe for around 1200 not sure if thats good: any thoughts...
Full race ramhorns go for $1000 usd. Custom is always expensive as its always a 1 off/first time. Hopefully the guy doing it for you is good.
What WG are you going to use? Setup?
Deano.
-
wouldnt u rather, a TRIED and TESTED manifold then a 1 off tho? cause it might not be worth the money?
Power Of Dreams...
VTECN
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
Bookmarks