Results 1 to 12 of 18

Threaded View

  1. #6
    Member Array
    Join Date
    Mar 2006
    Location
    Perth
    Car:
    JDM EG Built B16a2 Turbo
    Quote Originally Posted by TODA AU View Post
    B16A Turbo with BKR5EIX-11... You're asking for trouble there...
    That's 1 heat range hotter than stock giving you a good source of detonation.

    Re TPS, What did you do?
    What model Iridium should i be getting? I got what NGK recommends for the b16a2.

    I think its called the TPS...its the module under the throttle body that controls the idle via the water temp (picture below).



    I've had issues before where the cylinder inside has un-threaded itself causing it to idle high. I've fixed it in the past with help of some guys on here. I did the same thing as i did last time and the idle returned to normal. I could probably take it off again and put some new Intake gasket goo on to make sure its a perfect seal.
    Last edited by FastFwd; 07-01-2009 at 12:08 AM.
    Fastfwd Photoshoot cover pic Click here!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.