Euro Lip Kit Instructions

[The X Man]

Hi,

Does anyone here have some instructions or know where to find instructions on fitting the Euro Lip Kit (06-08 model)?

Cheers.

[r-r-redEuro]

its basically not that hard
honestly. 2 screws on each side, and a few bolts and clips at the bottom. and i think some double sided tape when it over laps and thats pretty much it.

[hongster]

he's got it..

there was a PDF link to all the EURO/TSX options and how to install them on this site or tsxclub or accurazine ,search and you might find them/it, but it pretty much just says the above except in more technical terms

[viper8548]

its basically not that hard
honestly. 2 screws on each side, and a few bolts and clips at the bottom. and i think some double sided tape when it over laps and thats pretty much it.

It doesnt look hard to put on, but theres actally more steps than meets the eye, I was slightly suprised at the extra steps in securing the lip when I read the instructions, I'll scan you a copy when I get home

[snYpz]

I found this nice write up on tsxclub about installing the front 07 euro-r lip...check it out and see if it helps.

http://www.tsxclub.com/forums/showthread.php?t=20957

[r-r-redEuro]

It doesnt look hard to put on, but theres actally more steps than meets the eye, I was slightly suprised at the extra steps in securing the lip when I read the instructions, I'll scan you a copy when I get home

its not too hard, its pretty much what i said though, i took off my lip and bumper off for fun so i can understand my car and how it works lol. and i put it all back together. :S

but please i want a copy still !! LOLLLL thanks viper. pm me when you get it thankssssss

[The X Man]

I received a full copy of the installation instructions from the dealer today, many pages i might add!

As the kit i bought doesn't come with all the nuts and bolts it's going to be a struggle getting all this too.

Anyone know anywhere in Adelaide to have the kit fitted properly? It looks complicated.

[snYpz]

^ i got mine fitted at a panel beater, maybe a panel beater would be the best option as they usually have spare clips and bolts as well.

[xsite85]

I received a full copy of the installation instructions from the dealer today, many pages i might add!

As the kit i bought doesn't come with all the nuts and bolts it's going to be a struggle getting all this too.

Anyone know anywhere in Adelaide to have the kit fitted properly? It looks complicated.

Hi X man.. i just installed my OEM honda luxury lip kit

i have a euro 08 gen 7, it was pretty easy install this kit.

the best way to start off is to take the rear wheels out.. start with the side skirts.

i also didn't have bolts and screws... used my own, a very good idea would be to get a mate to help out... my mate and i have had no experiance with installing bodykits before, so i believe it would be an easy task for you too.

Duration of this took about 4.5hr just remember to take out your front bar off and remove the fog lights, the most trickiest part is to remove the original fog light panel so the OEM kit would fit into place.

If you have any problems just pm me

Pete