ek muffler size

[muzukashi]

hey guys,

looking on getting a new canon muffler for my ek soon, jus posted in the wtb
would you wise people recommended a 2" or a 2.25" on a d16 with light mods?

[simonnowis]

go with a 2inch inlet size muffler.

[55EXX]

2" if it is just the cannon you're replacing 2" will do fine. stay away from cheap ones that sound hollow and rasp. quality ftw

[90LAN]

just get a ek4 muffler quieter and oem fitment with less noise but better flow

[muzukashi]

thanks for your opinions will probably go with 2" then,
would their actually be a noticeable difference between 2" and 2.25" ?

edit: jus slapped this up from ebay now, http://cgi.ebay.com.au/ws/eBayISAPI....2BSI%26otn%3D3

wat're your thoughts on this muffler? worth getting or should look elsewhere,

[90LAN]

thanks for your opinions will probably go with 2" then,
would their actually be a noticeable difference between 2" and 2.25" ?

edit: jus slapped this up from ebay now, http://cgi.ebay.com.au/ws/eBayISAPI....2BSI%26otn%3D3

wat're your thoughts on this muffler? worth getting or should look elsewhere,

all u will hear is a farty exhaust sound and no improvement at all
just all noise

[simonnowis]

are you just changing the rear stock muffler to that ebay cannon or piping to?
if just changing the rear muffler there wouldnt be really any difference going 2 inch or 2 1/4inch...will just be loud and farty, same as having holes in your stock muffler.

if your chaning piping to a 2inch would be recommended, too big and you will loose response and just be loud. if i were you, id stay away from ebay no brands as they will prob sound like crap.