Results 1 to 12 of 22

Threaded View

  1. #4
    Member Array
    Join Date
    Jan 2008
    Location
    SyDneY SouTh WesT y0!
    Car:
    98 EK
    J swap it!

    nah but h22a would be a torquey as car man!
    there are a couple cars rolling around with h22s in their civics.. heres one that danny wrote for egs which have similar engine bay size as eks.

    http://www.ozhonda.com/forum/showthread.php?t=47020

    H22a Engine coversion Prelude SIR/VTIR/type S

    This engine conversion i am not familar but.
    these engines can be found in the Gen 4,5 prelues, Accord Type R's etc
    H22as can be picked up pretty cheap compared to the B serise has they are not as popular.
    H22a's are very very torquey. There are few cars on the forums with H22a's and the can run mid to high 13's easy.

    A DIY ariticel Done by Honda B blastn
    http://www.ozhonda.com/forum/showthr...highlight=h22a

    H22as are rated at arond 142KW. but custom mounts such as hasports etc are needed to fit in into a EG
    oh and check this discussion out aswell

    http://www.ozhonda.com/forum/showthread.php?t=34727
    Last edited by dahon; 12-02-2009 at 09:36 PM.
    ||bye bye civic || hello awd turbo ||

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.