New ride - 08 CBR600RR

[RoNi_SiZe]

Nice bike! Where'd you get your tinted screen from and would you recommend it?

Got it on ebay for 1cent... + 37.99 shipping from a seller in hong kong.

It's OK, the fit is close to perfect, it's transparent, and well... yeh looks good.

Only complaint is, the cut along the top of the windscreen is a bit rough.

My mate also has a black 08 CBR600RR. His windscreen only cost like $10 more than mine but the cut is perfect along the top. He also got it from a seller on eBay, Hong Kong seller.

They're unbranded, but if u look on ebay (Hong Kong sellers), aim for one that's about $40-50 landed. Should be a good one.

[trinnyd]

Thanks mate. I was suss about the quality and fit of them. It great to hear a couple of people that have bought some.

[trinnyd]

Got it on ebay for 1cent... + 37.99 shipping from a seller in hong kong.

It's OK, the fit is close to perfect, it's transparent, and well... yeh looks good.

Only complaint is, the cut along the top of the windscreen is a bit rough.

My mate also has a black 08 CBR600RR. His windscreen only cost like $10 more than mine but the cut is perfect along the top. He also got it from a seller on eBay, Hong Kong seller.

They're unbranded, but if u look on ebay (Hong Kong sellers), aim for one that's about $40-50 landed. Should be a good one.

i just fitted a double bubble tinted screen on my bike that i bought from ebay for $10 plus $26 for shipping.

At first glance the screen is great, colour is consistant, strength is ok, but as you expect from a cheap ebay (chinese/HK) aftermarket part the finish is not quite there but is great for the price. The issues with the finish is that along the top ridge there is a little bump where the line changes a bit an then on the bottom the v is not even when fitted.

[EK4R]

i just fitted a double bubble tinted screen on my bike that i bought from ebay for $10 plus $26 for shipping.

At first glance the screen is great, colour is consistant, strength is ok, but as you expect from a cheap ebay (chinese/HK) aftermarket part the finish is not quite there but is great for the price. The issues with the finish is that along the top ridge there is a little bump where the line changes a bit an then on the bottom the v is not even when fitted.

go to clark rubber and get some thin rubber strips that covers the edge to place over the top and side edge to finish off the look.