DIY: How to paint side EK mouldings with no fuss.

[tiksie]

I think I saw you on parra road tonight in Lidcombe.. Do you have foggies ? lol

So many silver EK's with black bonnets floating around.

You should state the grit of the sandpaper you used, the process of sanding it..

I hope you sanded it until it was all matte with no shine at all as you don't want dimples getting sprayed over making it un-even.

It's also a good idea to clean the bit your spraying with wax and grease remover with a rag (any non-lint rag will do) and allowing it to dry before spraying your first coat of primer..Make sure you don't touch the panel as the oils on your fingers could preety much ruin a paint finish.