Page 14 of 18 FirstFirst ... 411121314151617 ... LastLast
Results 157 to 168 of 215
  1. #157
    just a question that i have been attempting to research on (obviously not hard enough)
    p platers under the new law cannot have a mod plate for the engine on the car they own/drive, yet i recently came across a picture on this forum (cant remember where abouts i saw it here however) of a eg civic with a b16a in it and the car owner was a p plater on the new laws
    now i understand that a engine swap does not require a certificate if you fit another engine offered by the manufacturer for the vehicle in question, but i thought all audm eg civics came with d series engines?
    sorry if some of the information is incorrect i am still learning about cars and i was hoping to buy a eg breeze and do the b16a swap until i came across this
    Last edited by hkjhd; 08-01-2009 at 12:13 AM.

  2. #158
    what you can do is, you can buy the car and use one of your parent's name who has a full license, that way, maybe chances are, you are able to do an engine swap. So basically, the car is under your dad's name ( for example ) and + if its under a person that is a full license, it is cheaper for insurance as well.

    im just guessing, dont know if it will work, just a thought

  3. #159
    Newcomer Array
    Join Date
    Sep 2008
    Location
    sydney
    Car:
    ek
    hey guys noob question here, what is obd1 and obd2?
    ...when the 'V-TAC' kicks in its all over....

  4. #160
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    different generations of ECU, the higher the OBD# the better ( and more universal ) diagnostics and emmesion control ect

  5. #161
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Hurstville Sydney
    Car:
    EH8
    hey guys im 16 looking at buying my first car was looking at buying a eg hatch although i cant decide weather to get an si or vti? d16y1 vs d16a8? single cam vtec vs dual cam non vtec?

    what are your opinions on what i should get?
    thanks in advance
    and yes my question may be classified as "noob" to you guys yes i know
    or ill get told off because i didnt search hard enough? lol
    Last edited by Onjays; 28-02-2009 at 06:32 PM.

  6. #162
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    I guess it's completely up to you.
    Do you want to do an engine swap? Do you want a sunroof or not?
    IIRC both D16's have the same power output.

  7. #163
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Hurstville Sydney
    Car:
    EH8
    oh ok so they do come with the same power output
    i see
    sunroof.. yeh.. so vti?
    haha thanks for that
    and yes i would love to do an engine swap down the road
    b18c haha big dreams

  8. #164
    Member Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    Bangbus
    Quote Originally Posted by Onjays View Post
    oh ok so they do come with the same power output
    i see
    sunroof.. yeh.. so vti?
    haha thanks for that
    and yes i would love to do an engine swap down the road
    b18c haha big dreams
    You'd need to wait until you're on your full license before you can do an engine conversion though


  9. #165
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    Quote Originally Posted by Onjays View Post
    oh ok so they do come with the same power output
    i see
    sunroof.. yeh.. so vti?
    haha thanks for that
    and yes i would love to do an engine swap down the road
    b18c haha big dreams
    If you want to do an engine conversion later on the I would suggest you get the VTi. So you can enjoy the sun roof and SOHC VTAK while you are on your P's then swap out for the B18C.

  10. #166
    Member Array
    Join Date
    Jun 2007
    Location
    Adel
    Car:
    DA3->EK1->DC2->
    off topic a bit here but can i ask:
    on the chassis of the EG and EH, are the chassis side brackets for engine mounts identical?

  11. #167
    Member Array
    Join Date
    Mar 2008
    Location
    Melbourne VIC
    Car:
    EF8 (ED9 with B16A)
    i have a civic with a zc crx harness and want to know how i can make it possible to run the b16a in it and also is there any other dissy that can be used to replace the td22u obdo distriubtor or if any magnetic pick up off any other honda could replace the td 22u one
    CRS3X

  12. #168
    •CRX• represent Array
    Join Date
    Nov 2003
    Car:
    CRX+CBR250RR
    this is a pretty good thread.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.