Results 1 to 11 of 11
  1. #1
    Newcomer Array
    Join Date
    Mar 2008
    Location
    VIC
    Car:
    s2000

    Brake Pads Recommendation

    Hi Guys,

    Less than 5% left on my rear pads. Which brand would you guys recommend? and how much approx? cost / performance comparison.
    -Project Mu?
    -Endless?
    -EBC?
    -OEM?
    -Bendix?
    -Ferado?

  2. #2
    Member Array
    Join Date
    Oct 2007
    Car:
    2003 Honda S2000
    what will you be using your car for?
    track
    street etc.

  3. #3
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    00 S2000 09 Audi S3
    OEM are great for low dust, long life and daily driven. I have used Endless about $265 SSM and they are great after a few hits on the brake pedal, operating temps are 50-300 degress. Better bite than OEm thats for sure, but alot more dust.

  4. #4
    Member Array
    Join Date
    Nov 2006
    Location
    Brisbane
    Car:
    Civic EG Si Hatchi
    yeh dude, gotta figure out what your gonna be using the car for. if you get "racing" pads then expect massive dust from them. im regretting getting Bendix Ultimate, so much dust and is eating away at my rotors quicker than OEM pads
    [h=Massive EG6/DC2 Part Out (majority brand new)
    http://www.ozhonda.com/forum/showthr...y-brand-new%29]2[/h]

  5. #5
    Newcomer Array
    Join Date
    Mar 2008
    Location
    VIC
    Car:
    s2000
    It's for Daily Driving, but might go to the mountain once in a while. Just don't want something that will fade.

  6. #6
    Member Array
    Join Date
    Oct 2007
    Car:
    2003 Honda S2000
    oem i think will do fine

  7. #7
    Newcomer Array
    Join Date
    Aug 2008
    Location
    Melbourne
    Car:
    AP2
    Ferodo DS2500's a good compromise for street/track..

  8. #8
    dont get bendix i have them in mine and they squeal like a ***** and there new
    "HONDA ADVISES THAT YOU PLEASE REMAIN SEATED DURING THIS FLIGHT, AS UN EXPECTED VVVVVVTEC!!! MAY CAUSE INJURY"

  9. #9
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    OEM is perfect for what your looking for
    FYS

    My fake shit rocks!
    Winton 1:35.4
    Wakefield 1:07.87

  10. #10
    Member Array
    Join Date
    Jan 2006
    Location
    Melbourne
    Car:
    Honda
    500 degrees pads suit you like Project M Bspec or Dixcel Type M.

  11. #11
    Member Array
    Join Date
    Apr 2007
    Location
    Brisbane
    Car:
    S2000
    OEM pads should be perfect. They are more than enough for the average driver - even on heavy mountain runs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.