Results 1 to 4 of 4
  1. #1
    Newcomer Array
    Join Date
    Mar 2009
    Location
    Melbourne
    Car:
    Lexus IS250

    How to remove back seat?

    Hey, sorry if this is a double post, but i couldnt find it.
    I have the GSi (1996) model and was just wondering how to remove the back seat in order to pass the amplifier cable through (from the battery) to the boot where the amp is going to be kept?
    thanks for any help.

  2. #2
    Member Array
    Join Date
    Feb 2009
    Location
    Melbourne - West
    Car:
    Accord Euro
    you have to take the driver side, rear back rest out to remove the bottom peace. There is a one 10ml bolt holding the bottom peace down its located right between the gap between the bottom and back rest wont be able to get to it until u remove the back rest

    hope this helps

    cheers

  3. #3
    Member Array
    Join Date
    Feb 2008
    Location
    Brisbane
    Car:
    Dc2 + EG
    Also where the seat touches the side of the car on the inside.
    There will be a little c clip which you need to pull it off first.
    Its black so get a torch.

  4. #4
    Newcomer Array
    Join Date
    Mar 2009
    Location
    Melbourne
    Car:
    Lexus IS250
    thanks for both ur help, when im installing my system, ill give it a go, see if i can do it myself lol

    thanks again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.