Page 4 of 5 FirstFirst 12345 LastLast
Results 37 to 48 of 60
  1. #37
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A
    Quote Originally Posted by fatboyz39 View Post
    Question: Do you think you would of ran 11.7's with the cams setup you had before going to Buddy clubs?
    11.82 was as fast as it can go on stock cams on that weight. Half track is abit slower compared to this set up.

    With buddyclub n+ cams , the potential is there , it might dip into high 11.5 sec.

    As you can see on my 11.73 video clip , i hit the limiter on 1st and 2nd gear which is bad for the ET. 11.6 should be so doable
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

  2. #38
    Member Array
    Join Date
    May 2005
    Location
    Villawoood
    Car:
    n/a
    is this a PB for your 60ft time as well Yonas?

  3. #39
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A
    Quote Originally Posted by xtercii View Post
    is this a PB for your 60ft time as well Yonas?
    Yes 1.64 is my 60ft PB
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

  4. #40
    Member Array
    Join Date
    Nov 2003
    Location
    Tasmania
    Car:
    Honda Corolla G
    g00d shit yonas.

  5. #41
    Member Array
    Join Date
    Sep 2006
    Location
    WSID
    Car:
    Crew for Hi-Comp Civic
    Quote Originally Posted by EG5 View Post
    11.82 was as fast as it can go on stock cams on that weight. Half track is abit slower compared to this set up.

    With buddyclub n+ cams , the potential is there , it might dip into high 11.5 sec.

    As you can see on my 11.73 video clip , i hit the limiter on 1st and 2nd gear which is bad for the ET. 11.6 should be so doable
    I will vouch for this. He did another run later on in the day and messed it up even more and ran 11.78. Its got heaps more in it. Its just a matter of finding the right set up to get the time. (By set up I mean tyre pressures, launch rpm, shift points, etc etc). The potential is there it just needs to be realised.

    He will get there. It just takes a lot of trial and error to achieve the result. And you can be assured Yonas puts in the effort required. We are all a big fan of his and his car.

  6. #42
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A
    Quote Originally Posted by grumpy rooster View Post
    I will vouch for this. He did another run later on in the day and messed it up even more and ran 11.78. Its got heaps more in it. Its just a matter of finding the right set up to get the time. (By set up I mean tyre pressures, launch rpm, shift points, etc etc). The potential is there it just needs to be realised.

    He will get there. It just takes a lot of trial and error to achieve the result. And you can be assured Yonas puts in the effort required. We are all a big fan of his and his car.
    Thanks
    You watched too many races of my EGK24A down the 1/4 mile.
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

  7. #43
    As per the other posts, well done!

  8. #44
    Member Array
    Join Date
    May 2008
    Location
    Sydney, North
    Car:
    A piece of shit
    Good shit gold nads!! Everyone is getting faster and faster!

  9. #45
    Member Array
    Join Date
    Aug 2005
    Location
    Wagga Wagga NSW
    Car:
    DC5R
    congrates on the pb yonas
    183.2KW ATW
    BUILT BY DR
    Tuned by INSIGHT MOTORSPORT

    12.44@109.9mph

  10. #46
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Well Done Yonas!

    I thought with the Buddyclub cams,a bit more time would have been taken off.

    I see ya just chopped the back of the bumper off

    An awesome time mate,CONGRATS!!

  11. #47
    Member Array
    Join Date
    Nov 2005
    Location
    Sydney
    Car:
    Eva
    Amazing mate, so much K24a3 inspiration right here!
    CL9 Euro Luxury

    Toda - 127kW | Wakefield - 1:19.1 | WSID - 15.4

    QUALITY K-SERIES AND CL9 EURO PARTS FOR SALE

  12. #48
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A
    Quote Originally Posted by integral90 View Post
    Amazing mate, so much K24a3 inspiration right here!
    Stock k24a3 bottom end + 98 octane fuel FTW
    Last edited by EG5; 17-03-2009 at 05:28 PM.
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.