Quote Originally Posted by outatime View Post
it turns out that the best setting for me is setting the 6x9 rears and front speakers & splits to both FLAT.

but i'm not sure about the frequency settings... should i set the frequencies at the same rate? the rears are at 80Hz and the fronts are about 100Hz.

when you set both to flat you are not using the crossovers. It doesn't matter where you set the frequencies as it will all sound the same. your speakers are playing full range of frequencies.


try these combinations

front/rear 60/60
front/rear 60/80
or even front/rear 60/50

you will have less bass but the speakers will sound cleaner as they have less to deal with.


btw, what splits are they? 6in should easily handle being hp'd at 80 hz. I hp mine at 60hz, even at 50hz sometimes, but only when i'm listening at lower volumes. it lags a bit at higher volumes.