injectors

[creativepunka]

hey im after some injectors for my d16y1, i dont want to go over 80% duty cycle and will run about 10 psi. iv already got a computer to run them. What does everyone recomend 400cc?? i want secondhandys and was thinking of getting some from the states and just getting them sent over.

[Weq]

440's will do

[Nuttz]

yeah you could try to find some ebay DSM 440cc's CHEEAAAPPP

[STOCK]

whatever injectors you buy, if you plan on keeping your stock ecu you have to buy high impedance bosch style ones so it will fit back on your fuel rail without too many dramas.

[creativepunka]

thats the other thing, will dms440s still fit in the fuel rail? i will be using stock ecu with a s-afc/v-afc controlling A/F.

[Weq]

they will fit. u run ODB1 injector clips, so they are slot in with a resister box (or resisters wired inline custom)

[creativepunka]

what would i pay for dms 440's and would i be best getting them from ebay usa? cheers guys

[Nuttz]

yeah ebay has it all!!
i dont think there are many guys who ship to aus, but see if u can find them. I think the going cost is about $70US. so it comes to about $140AUS, whish is a pretty good price for 440cc injectors.

and dont forget to install resistors/resistor box as well.

[pornstar]

u guys do realise that DSM injectors are just mitsubishi injectors right?....

just seems like u guys are going sick before u realise what they are...

[pgclee]

get a H22a injector...cheap and good...more than you need as well..i think is either 290cc or 330cc...same as NSX...

[creativepunka]

get a H22a injector...cheap and good...more than you need as well..i think is either 290cc or 330cc...same as NSX...

Na ill need bigger as im using a s-afc/v-afc.

[barefootbonzai]

creativepunka, have you decided on what injectors you're goin with yet? Cause i'm gonna be doin the exact same as you too. 440CC injectors with V-AFC.