Step 6:
Ok now remove the bracket and more the caliper out of the way and take off the rotor, should look like this


Now would be a good time to clean up the hub and little bit before you install the sexy new slotteds.

Step 7:
Ok this is a good idea i think, test fit; i put the rotor on and did up the wheels nuts finger tight just to make sure all with fit perectly and well what do you expect from DBA? perfect.


Step 8:
Here are the 2 discs against each other


Now you have to give the disc a clean (according to DBA) wipe off each disc surface with some NON OIL based cleaner. I used metho. only wipe the disc surface or you will wipe off some paint.