WASABI HERES A NOTE THAT U MUST FOLLOW, and no my caps lock isnt broken.. the paint has to dry off completely LIKE leave 24 hours if u have it before you clear coat. I used the clear coat on top like after 3 hours of drying and like the clear coat made the paint run off, and bubble and the clear grabbed onto itself kinda. Here's what happened.
if i wanted it to be matt black.
without the clear coat would it be more likely to peal, chip what not.?
My wheels were painted matt black. No clear coat and no chipping yet. Just make sure you prep the wheels right.
Fine sand it with wet/dry sand paper. Primer say a good 2-3 coats then the black. Let it set overnight and you'll be sweet.
Wasabi, you'll need around 4 coats. I let my wheels set about 10-15mins after each coat before applying the next.
Sitta It doesn't peel if its prepped right. I had my other set painted black and did 2 mountain runs, alot of carwashs and gravel carparking with no chipping. This was done for around 1 year or so.
yea i suggest u sand down the surface with 600 grit first, then primer it then sand it again with 1200, primer again then sand with 1200 then start the painting.
Reply With Quote
Originally Posted by vinnY
Bookmarks