DIY: CTR Headlight for EK (without oven)

**eternityz** · 23-03-2009 03:21 PM

sick!

i'll try this sometime in the weekend or earlier

i'll post pics up after im done

**Riviera** · 23-03-2009 03:25 PM

i did this on the weekend while installing my freshly DIY rebuilt motor.
turned out pretty good, went for gloss black though

sex...

**jdmEG5** · 23-03-2009 03:48 PM

can this work for an EG and ED tooo?? (: if so, i wanna try to do some "experimental" on it LOL

**EK4R** · 23-03-2009 04:53 PM

yes sure can.

rep it up ++ hahah

glad its helpin you new comers out

**eternityz** · 26-03-2009 11:31 AM

just done this last night it look great!!

but i need to get rid of those yellow cloudly haze on the headlight :S

**EK4R** · 26-03-2009 03:02 PM

use a plastic polisher and buff it off. if doesnt work. then use wet n dry sand paper. start with the lowest grit to the highest (200 > 400 >800> 1200 >1500 > 2000 ) then polish with plastic polisher. Autosol works too

**Gio** · 26-03-2009 04:52 PM

How come it builds up on the outside?

Thought it would be on the inside, but yeah, it isn't.

**mystic0l** · 27-03-2009 10:19 AM

thanks for the write up....
haha i sprayed the indicated reflector too -.- but clear coat fixed that
omg it was a the biggest hassle taking off the seal with a hairdryer but in the end my friend did most of the work... =]