Quote Originally Posted by oat.iphone View Post

can i just buy the valve clearance, get this done myself? is it hard? can anyone here please guide me DIY for this

thankz
I'm sure Honda would do a valve clearance check by itself, not sure how much though. It's not hard if you are mechanically minded, search these forums and you'll find a link to the Euro service manual, it has step by step instructions.

I checked mine recently, the clearances IIRC (someone please verify?) should be 8-10 thou for the intake and 10-11 thou for the exhaust. I didn't have to adjust any of mine, they were all still spot on. Took me around an hour.

Tools wise you'll need a standard socket set, feeler gauge, liquid gasket and a torque wrench (optional, but recommended).

HTH

-Steve