EP3 Type R

[Perry]

I think they are 4 pot.

[questera]

Ah i thought so, they are 6 pot right?

They are 4 pots. i think You will need the JDM DC5 knuckle set and also the lower arm bar to do the conversion.

[chargeR]

Ah i thought so, they are 6 pot right?

They are 4 piston.

You will need everything that you need to do a conversion on an AUDM DC5R which includes but is not limited to (this is for the front only):

Calipers, brackets and pads
Rotors
Hubs/Knuckles
Lower control arms
Axles
ABS sensor lines
Front sway bar

You might also need to change the tie rod ends if EP3R ones are different to DC5R.

[Nepolian]

Better off gettin a big brake kit from the us for similar money. Many people have done the JDM brembo with mixed results.

[Philip Lee]

Better off gettin a big brake kit from the us for similar money. Many people have done the JDM brembo with mixed results.

x2

i'd just go straight to Endless/AP racing etc kits for the same or better result and less hassles.

[rpm boy]

Yeah i saw the dc2r stc big brake kits on the night shift page, they said the ep3/dc5 kits are comming soon, so i might hold out till then...
pad wise, whats everyone running? slotted/drilled rotors also make much of a diff?

[Nepolian]

Yeah i saw the dc2r stc big brake kits on the night shift page, they said the ep3/dc5 kits are comming soon, so i might hold out till then...
pad wise, whats everyone running? slotted/drilled rotors also make much of a diff?

Id spend the money on performace stuff first. Plenty of people track DC5Rs with OEM rotors and calipers with only upgraded pads to good effect.

If you want bling, just get a set of spoon calipers! Easy to fit, no mods!

[rpm boy]

No, i dont want anyone to know nething when there looking at the car, id rather nieve people just think its a 2 door jazz, engine work is on its way, want to get about 200kws but just reasearching as to what i would need for diff brake setups, and which would be more suited for the car setup. i mean its not going to be a massive turbo or supercharged thing, just bolt ons and head work to compliment/get the motor running to its full potential ....N/A All the way

[Philip Lee]

200kw @ front wheel or fly?

[Nepolian]

200kw @ front wheel or fly?

$$$ to get 2.0L to 200kw even at fly LOL!!!

Trust me I know

If I had my time again, I'd go 2.4L straight up!

[Mugen_B16B]

i reckon 200kw, if u could get that with bolt ons and keep it NA ill buy u a set of spoon calipers

[ITRDC2]

hi did anyone install hid for ur ep3?i bought a set in firesport and it doesnt work to mine,is that cuz im unlucky to get some dumb hid or anything else...so upset