Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 36

Thread: dc2 vtir on 1/4

  1. #13
    Member Array
    Join Date
    Aug 2008
    Location
    Sydney
    Quote Originally Posted by lil_foy View Post
    15.1

    i/h/e shit tyres on 17's
    nice time bro..... what manifold u running? 4-2-1? 4-1? custom or marketed? 2/1/4 piping? and is ur intake cai? or sri?

  2. #14
    Member Array
    Join Date
    Feb 2008
    Location
    Brisbane
    Car:
    Dc2 + EG
    Regular cai to guard.
    5 Zigen 4-2-1
    Highflow Cat
    2.25 catback with a huge muffler.

    Ill take off the muffler next time.

    Might go out to the next one me thinks.

  3. #15
    Member Array
    Join Date
    Aug 2007
    Location
    Sydney
    Car:
    Choo Choo shoe.
    Might i add.

    Tyre pressures is a big factor.

    I ran 34psi all round when i ran 15.8

    With 20 in the front and 40 in the rear, you should be able to run quicker times.
    Along with any big rocks in your tyre tread. Remove it if you have the time.

  4. #16
    Member Array
    Join Date
    Feb 2008
    Location
    Brisbane
    Car:
    Dc2 + EG
    Quote Originally Posted by OMG.JAI xD View Post
    Might i add.

    Tyre pressures is a big factor.

    I ran 34psi all round when i ran 15.8

    With 20 in the front and 40 in the rear, you should be able to run quicker times.
    Along with any big rocks in your tyre tread. Remove it if you have the time.
    This really only effects smaller tyres tho. I.e: 15"

    The only advantage I got was a flatter contact patch because the tyre didnt bubble at the bottom with my 17's.

    All in the launch imo.

    If you can't launch for shit then your time will be shit.

    Also dont panic!

  5. #17
    Member Array
    Join Date
    Aug 2007
    Location
    Sydney
    Car:
    Choo Choo shoe.
    Quote Originally Posted by lil_foy View Post
    This really only effects smaller tyres tho. I.e: 15"

    The only advantage I got was a flatter contact patch because the tyre didnt bubble at the bottom with my 17's.

    All in the launch imo.

    If you can't launch for shit then your time will be shit.

    Also dont panic!

    LOL.

    First run ever. Tried to copy the fully sick pro burnouts. Swaying the front side to side with e brake up. (really wasnt that hard) But with torque steer, if you dont hold the steering wheel it pulls the steering wheel to one side.

    Silly me. My heart beating. People watching. Dude gives the signal for a burnout.

    Spun the wheels. And my hand let go of the wheel. Car veers to the left and nearly hits the middle island thing where it seperates the 2 lanes. and there i am. All shaken with my foot still on the pedal, clutched in. Rev bouncing. And people lookin at me like .. wtf? LOL

    So with shame. I staged up.
    Rainbow lights go to green. Launched. Bogged and went.
    Shifted 2nd. Crunched. -.-"


    Lesson learnt. Hold the steering wheel really tight or use 2 hands.

    Oh and i ran stockies 15" so the tyre pressure applies =D



    And might i add another thing lol -.-"
    Reason i bogged on launch. For the first timers. Its not pavement there. Probably is under 3inches of rubber. (exxageration).
    But it really grips compared to tarmac where the wheels spin freely.
    4grand rev dump 3/4 clutch engagement n it bogged.


    And yes. Its all about the launch. =]

  6. #18
    Member Array
    Join Date
    Aug 2008
    Location
    Sydney
    Quote Originally Posted by damo46 View Post
    A while back in late 2008 i went to a ozhonda meetup at wsid and ran my mates integra vtir for him, car was bone stock, and my friend actually forgot to run 98 octane and had put 91 in it.... The car was in full trim plus had his work eskie and heaps of other stuff in it, not even spare tyre removed
    Car has half a tank of fuel and im about 90kgs
    First 2 runs where shit as both runs i missed a gear for each and ran a 15.8 then a 15.7
    Last run i managed to get all gears in with an ok luanch 2.35 sixty footer and done a 15.4@91mph.... Was bit dissapointed becoz i didnt get any other runs and on my first run i got a 2.300 sicty footer but then went from 2nd gear into 5th, and still done a 15.8

    I reckon that night if i removed the spare tyre and rear seats and excess weight and had 98 ron, i could have managed a 15.0 no problems

    Tyres were shit with 18psi in fronts
    Stock suspension
    6000rpm luanch ridng the clutch out a bit then jumping on the throttle quick

    A good bone stock vtir with low psi in tyres and high rpm good luanches can easily manage low 15's
    good time

  7. #19
    Member Array
    Join Date
    Aug 2008
    Location
    Sydney
    Quote Originally Posted by lil_foy View Post
    Regular cai to guard.
    5 Zigen 4-2-1
    Highflow Cat
    2.25 catback with a huge muffler.

    Ill take off the muffler next time.

    Might go out to the next one me thinks.
    nice time.. what were u launching at.. and whered u buy ur headers from and roughly how much? thanks

  8. #20
    Member Array
    Join Date
    Aug 2008
    Location
    Sydney
    Quote Originally Posted by Vtec R View Post
    My old DC2 ran a best of 15.3
    Held the hand brake and riding the clutch at 3.5k to 4k revs


    MODS: Axle back twinloop, standard airbox lid taken off

    street tyres,slicks or semi slicks: Camber worn Maxxis tyres

    stripped or not stripped out: NON stripped
    pretty good time

  9. #21
    Newcomer Array
    Join Date
    Jan 2009
    Location
    Brisbane
    Car:
    EK Civic VTi-R
    Quote Originally Posted by RR-04-RR View Post
    what are your mods?

    i know its abit different but i have a DC2R with only a CAI

    7000rpm pre loading

    using re001 tyres

    managed a 14.6 with a 2.3 60 foot
    whoa is it safe to pre-load at 7000rpm? Seems kind of harsh hahah I'm a lil girl and just dump the clutch at around 3500rpm weak launch ftw!

  10. #22
    Member Array
    Join Date
    Oct 2008
    Location
    Sydney
    Car:
    DC2R
    Quote Originally Posted by OMG.JAI xD View Post
    LOL.

    First run ever. Tried to copy the fully sick pro burnouts. Swaying the front side to side with e brake up. (really wasnt that hard) But with torque steer, if you dont hold the steering wheel it pulls the steering wheel to one side.

    Silly me. My heart beating. People watching. Dude gives the signal for a burnout.

    Spun the wheels. And my hand let go of the wheel. Car veers to the left and nearly hits the middle island thing where it seperates the 2 lanes. and there i am. All shaken with my foot still on the pedal, clutched in. Rev bouncing. And people lookin at me like .. wtf? LOL

    So with shame. I staged up.
    Rainbow lights go to green. Launched. Bogged and went.
    Shifted 2nd. Crunched. -.-"


    Lesson learnt. Hold the steering wheel really tight or use 2 hands.

    Oh and i ran stockies 15" so the tyre pressure applies =D



    And might i add another thing lol -.-"
    Reason i bogged on launch. For the first timers. Its not pavement there. Probably is under 3inches of rubber. (exxageration).
    But it really grips compared to tarmac where the wheels spin freely.
    4grand rev dump 3/4 clutch engagement n it bogged.


    And yes. Its all about the launch. =]
    hahaha you gotta love those nerves. hearts full on pumping and leg shaking. dont worry man a few more runs and it goes away
    YB0057 DC2R K20a 12.32 @ 108mph
    1.79 60ft

  11. #23
    Member Array
    Join Date
    Nov 2008
    Location
    Sydneys West
    Car:
    2001 Dc2R
    Quote Originally Posted by eeKayFouR View Post
    whoa is it safe to pre-load at 7000rpm? Seems kind of harsh hahah I'm a lil girl and just dump the clutch at around 3500rpm weak launch ftw!
    lol nope not safe... you'll just wear out your clutch aabit lol

    take a risk and try it.. you wont regret it!

    i used to get 15.0, 15.1 launching at about 5500 - 6000

    and ever since launching at 7k rpm.. got into the 14s with ease!!

    if the car boggs... next try.. rev higher! lol YBOOST gave me that advice and it works

  12. #24
    Member Array
    Join Date
    Oct 2008
    Location
    Sydney
    Car:
    DC2R
    hi RPM FTW!!! drive it like its stolen lol
    YB0057 DC2R K20a 12.32 @ 108mph
    1.79 60ft

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.