Results 1 to 12 of 170

Hybrid View

  1. #1
    s tune Array
    Join Date
    Jun 2005
    Location
    ADL
    Car:
    99 DC2 sold :(
    do you mean the coolant drain tap? There's a tap at the bottom of your radiator but no air bleed.

  2. #2
    Member Array
    Join Date
    Nov 2005
    Location
    ACT
    Car:
    Integra DC2
    Quote Originally Posted by T-onedc2 View Post
    do you mean the coolant drain tap? There's a tap at the bottom of your radiator but no air bleed.
    nah the air bleed. it just doesnt have one. weird but i did the thermo change anyways.

    ...LS...

  3. #3
    Member Array
    Join Date
    Jun 2009
    Location
    Bankstown
    Car:
    DC2 VTi-R '94, Vienta '96
    hey guys,
    i think i have a similar problem with my vtir 94

    the radiator is boiling, and the temp goes all the way to H...i had to stop the car to let the whole engine cool down...

    and on idle, the temp rises to bout 3/4 to H, and revving at 1.500rpm, just on idle..sometimes at 2.

    ive read the previous posts but those problems are either running under normal 40% temp or heating but to not my extent.
    I'm asian but i hate Cabra roads..ah du ma!

  4. #4
    Member Array
    Join Date
    Mar 2008
    Location
    Sydney
    Car:
    Bangbus
    Quote Originally Posted by TT44NG View Post
    hey guys,
    i think i have a similar problem with my vtir 94

    the radiator is boiling, and the temp goes all the way to H...i had to stop the car to let the whole engine cool down...

    and on idle, the temp rises to bout 3/4 to H, and revving at 1.500rpm, just on idle..sometimes at 2.

    ive read the previous posts but those problems are either running under normal 40% temp or heating but to not my extent.
    How is your coolant level?
    I would flush out the coolant and get some new coolant in there, also does your fan come on?

    You might have a coolant leak somewhere, if coolant level is fine and your fan doesn't come on then I'd have the fanswitch replaced.
    It could also be caused by a thermostat dying/being stuck closed so no coolant will flow through, in which cause you'd need to get the thermostat replaced.


  5. #5
    Member Array
    Join Date
    Jun 2009
    Location
    Bankstown
    Car:
    DC2 VTi-R '94, Vienta '96
    Quote Originally Posted by geeang View Post
    How is your coolant level?
    I would flush out the coolant and get some new coolant in there, also does your fan come on?

    You might have a coolant leak somewhere, if coolant level is fine and your fan doesn't come on then I'd have the fanswitch replaced.
    It could also be caused by a thermostat dying/being stuck closed so no coolant will flow through, in which cause you'd need to get the thermostat replaced.

    ive refilled the water and its running fine now..fan works fine, gona do a service on it tomorrow, should be fine =]

    thanks alot mang
    I'm asian but i hate Cabra roads..ah du ma!

  6. #6
    Member Array
    Join Date
    Jun 2009
    Location
    Bankstown
    Car:
    DC2 VTi-R '94, Vienta '96
    took the car to hannys today, they checkd and said it was the head gasket..
    gona cost me 1k to repair.

    du ma
    I'm asian but i hate Cabra roads..ah du ma!

  7. #7
    Member Array
    Join Date
    Aug 2007
    Location
    Brisbane QLD
    Car:
    ED-209
    Quote Originally Posted by TT44NG View Post
    took the car to hannys today, they checkd and said it was the head gasket..
    gona cost me 1k to repair.

    du ma
    Wot a bitch man, maybe shave some mm off the head while ur at it...

  8. #8
    Member Array
    Join Date
    Jun 2009
    Location
    Bankstown
    Car:
    DC2 VTi-R '94, Vienta '96
    Quote Originally Posted by Mikecivic78 View Post
    Wot a bitch man, maybe shave some mm off the head while ur at it...
    swapping the head gasket would cost too much, hanny's wasnt specific, i took it few other palces they go 1k no way..
    so i took it to my dad's friends one, they're swapping a 2nd b18c in it as we speak, hope she comes home soon..=[
    I'm asian but i hate Cabra roads..ah du ma!

  9. #9
    Member Array
    Join Date
    Sep 2009
    Location
    West sydney
    Car:
    Integra DA9

    i rekon

    I reckon this is a problem with newer engines

    I got a 1990 model integra, the temp use to be middle all the time.. shoot up straight away.. even at 140k's in winter now.. it was still warm.. the engine.

    I recently got a full ENGINE change to a 2001 model and now the temp stays at Cold sometimes when im punching it on the m4 it gauge just conks out, as if i just started the car on a cold morning.. then i slow down at a red light or something all u see..it goes back up to about 1/5 NEVER EVER reaches the middle, always less.. MAX i got it up to and that was on the spot reving, riding my clutch and burning shit.. lol was about.. 2/6

    These engines are TOO cold myn is a GSi you guys are all running vtecs i reckon yours should be much warmer than myn.

    oh and guys i removed my thermostat, my last one blew my headgasket lol
    Last edited by slimx; 03-09-2009 at 12:31 AM. Reason: forgot to include thermostat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.