-
07-05-2009 12:56 AM
#3769
 Originally Posted by cracker
no clizzue..maybe if u dont ride with 2 credit cards and 2000 cash u aint runnin rich...u aint ballin...im ballin.. im a baller...thus i ball...often
LOL post of the year!!!!
-
07-05-2009 01:32 PM
#3770
yeh weekend sounds good.. sunday? i got work and a 21st on sat
edit - day off ftw! im off to lunch then i'll come back and finish the diy's
Last edited by .k.; 07-05-2009 at 01:41 PM.
-
07-05-2009 02:40 PM
#3771
yea i was thinking hm maybe an xforce canon, but i don't like the look of the canon on the mugen kit, much prefer the twin tip and wanted to keep it clean/stock looking, so i had to compromise and go for the resonator, wasn't aware id lose responsiveness though, but ive compensated for it by driving in S mode more lol, does actually increase responsiveness esp at the low end (which is where the responsiveness was lost - especially going uphill)
btw could someone tell me WHY its losing responsiveness? i cant quite derive why it is like it is
Last edited by black8thgen; 07-05-2009 at 03:17 PM.
-
07-05-2009 03:38 PM
#3772
ok got another question: anyone know if i can tap a pos/neg wire to any wires in the INTERIOR fuse box?
-
07-05-2009 03:55 PM
#3773
hmm not sure man (whats your name btw im khoi).. if your not doing anything tho checkout my diy and let me know what you think. the rear licence plate light is up.. gotta do front parker and low beams now..
kinda gettin sidetracked playin cod4 tho lol so theres prolly typos
-
07-05-2009 04:01 PM
#3774
my name is ryan =D.
oh hahaha yea ill check it out. ahhh needa look for a power source inside the car T_T.. anyone know what cables in the fusebox i can tap? such as the interior dome light (if there is one for it in the itnerior fuse)
-
07-05-2009 04:22 PM
#3775
haha thanks for the comments.. go check my parker+lowbeam one now? HAHA.. dont have pics yet camera died..
btw whatcha doing that needs the power?
-
07-05-2009 04:33 PM
#3776
putting LEDs in the front grille hahah. such a ricer =[. but yeah.. and also my current LEDs in the footwells i have currently hookd up to the ciggie lighter, but i wanna change it and hide it better so yeah wanna wire up to something in the interior fuse box (preferably the interior dome light cables)
haha kk ill check it out now
-
07-05-2009 04:53 PM
#3777
 Originally Posted by ekdez
@black8thgen
yeah its all about the air to fuel mixture. it can be caused by changing intakes which allows more air to be sucked in and exhausts with larger diameter outlets. honda made their engines with specific intakes and outlets because they were the correct sizes if you get what i mean.
running rich is when fuel ratio is greater then air, its ok to run rich, just means you need a tune, if the inside of your exhausst pipe is black or going black due to the backfiring or popping, then your running rich.
running lean is when the fuel ratio is lower then air, start worrying. LOL i dunno the car symptoms of this haha
I also installed a K&N Typhoon Short RAM Intake a few months ago. The first day I installed it the sound and performance was incredible!! 3 days later this disappeared and since then I have since been told it is running lean and have noticed an acceleration lag of a few seconds, basically till I get to about 6000revs. Strange/horrible thing is the car is still guzzling fuel quicker than before the SRI was installed, I get around 450/470kmph driving around at an average of about 75km/h mostly on the canberra roads here. I acknowledge the ABS plastic Mugen bodykit + spoiler adds weight and thus fuel consumption but have still noticed greater fuel consumption since installing the SRI. Anyone know how to deal with these performance/lag issues?
-
07-05-2009 10:09 PM
#3778
Any one know if its possible to drop a later model k20a with a 6 speed manual gear box preferable like a ep3 or dc5 k20 into a 06 civic sports..would the computer wiring all be the same or need customizing or is possible too mod the k20z too become more powerful than k20a standards
-
07-05-2009 10:24 PM
#3779
someone's done it before, but with different headers..
(dropping a k20a sourced from an ep3 + skunk2 intake manifold + custom exhaust manifold)
-
07-05-2009 11:54 PM
#3780
it can be done, sum ppl hav done it with a K24 block + K20A ivtec head... works great + those extra torque from the 2.4L! or a JDM FD2R K20A will fit directly but $$$
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks