The flange is a t3 flange, im pretty sure anyways.. I will have to check when i get home tonight... Are there any traders on here that sell the EBC manifold? Or did you purchase yours through others means?
HKS is the manfoild brand
EBC stands for Electronic Boost controller, that's how I hold boost
161.4KW ATW Tuned By TODA EG5 JDM B16A SiR-II TURBO
sorry i shouldnt have abbreviated what luke said above ^^^
the T peice is simply a bleed valve i have a turbosmart one its fine for you to use i am upgrading to a AEM EBC
There are nearly no manifolds for the motors really so a custom made one is your best bet unless you find one on american ebay they have heaps of cast ones... dont get a stainless one they are usually really badly made thin steel and crack very easily i have seen this on more than one occasion and have some pretty nasty photos of failed ones.
throgh a pic up of the turbo your going to use and i'll tell you what flange it is
also luke did you know on your APS turbo you know that the internal wastgate on it has been ported and wastegate flap replaced with a larger one for higher flow yeah?
WOULD YOU LIKE SOME FRONT BAR WITH YOUR FRONT MOUNT
sorry i shouldnt have abbreviated what luke said above ^^^
the T peice is simply a bleed valve i have a turbosmart one its fine for you to use i am upgrading to a AEM EBC
There are nearly no manifolds for the motors really so a custom made one is your best bet unless you find one on american ebay they have heaps of cast ones... dont get a stainless one they are usually really badly made thin steel and crack very easily i have seen this on more than one occasion and have some pretty nasty photos of failed ones.
throgh a pic up of the turbo your going to use and i'll tell you what flange it is
also luke did you know on your APS turbo you know that the internal wastgate on it has been ported and wastegate flap replaced with a larger one for higher flow yeah?
Hey Ryan
Not sure but the internal wastgate flap is very big compared to my last turbo lol
Dose not matter once you run an EBC anyway
Last edited by Lukezen27; 18-05-2009 at 12:18 PM.
161.4KW ATW Tuned By TODA EG5 JDM B16A SiR-II TURBO
Ive had a bit of a search for the HKS log manifold... it does seem they are pretty hard to get... The only one i could find was for a d-series, and was second hand...
Not sure but the internal wastgate flap is very big compared to my last turbo lol
Dose not matter once you run an EBC anyway
Yeah i was looking at the pic of it in the build thread and it wont affect the turbo at all they do it to increase the flow through the wastgate so that more gases can get out to help stabalize boost pressure levels.
Wasnt saying its bad its a extra AA+++ for the price ya got it for man just thought i would tell ya incase you didnt know.
after hunting around for one you may as well spend the extra little bit of money get the custom made manifold and know that you wont have to look around for one and know that everything will bolt up straight away keeping your a/c and p/s
WOULD YOU LIKE SOME FRONT BAR WITH YOUR FRONT MOUNT
lookingforboost.. your right... Im heading to a couple of places to try and find some tuners that will look at the set up im proposing and see how much they are looking for a custom manifold...
Who have the people running boosted dc2's in qld gone to see? Im thinking if i go to a workshop that has had some experience in making the manifold, then it wont be so expenisive as they will already have an idea what is needed...
Just been wondering... Had a look and did some measuring to get the sort of dimensions im looking at...
What has everybody done with the dipstick when turboing up the car??? Does it just sit under the manifold and make it a bi**h to check? has it been moved? etc
Just been wondering... Had a look and did some measuring to get the sort of dimensions im looking at...
What has everybody done with the dipstick when turboing up the car??? Does it just sit under the manifold and make it a bi**h to check? has it been moved? etc
Cheers
I had to bend the dip stick tube a tiny bit but now its like checking OEM style...
161.4KW ATW Tuned By TODA EG5 JDM B16A SiR-II TURBO
Originally Posted by Webby_roller
Reply With Quote
just thought i would tell ya incase you didnt know.
Bookmarks