dc5 after market exhaust size

**franki** · 16-03-2005 01:02 PM

Hey people. im new to ozhonda. i searched but was unsuccessful. what is the best size mandrel bent exhaust to put on a dc5 integra type R and approx. how much kw gain?

**Marz** · 16-03-2005 04:32 PM

2.75"
Gains vary on a heap of things.
Some people say 10hp, say people say 20 or 30.

**davidd** · 16-03-2005 04:49 PM

On dc5's everyone says go as big as you can go.

Even a 2.36" has a big advantage over standard, the car will just pull so much harder.

Another place to check out is www.clubrsx.com, heaps of dc5 info on there

**JINRAI** · 16-03-2005 05:18 PM

yea search on clubrsx

**z3lda** · 16-03-2005 05:57 PM

dont listen to them. u need ATLEAST a 5" boxing bend piping, with 6" inlet muffler and 15" muffler tip. gains have been recorded up to 45kws at the rear wheels.

**NeoNode** · 16-03-2005 07:36 PM

Originally Posted by z3lda

dont listen to them. u need ATLEAST a 5" boxing bend piping, with 6" inlet muffler and 15" muffler tip. gains have been recorded up to 45kws at the rear wheels.

Only achieved by reversing your car Yo!

**whtdc2** · 16-03-2005 09:22 PM

Originally Posted by NeoNode

Only achieved by reversing your car Yo!

oh yes, it will turn our DC5 to rear wheel drive!!

**franki** · 17-03-2005 07:15 AM

thanx for the help guys. i think i might go with a 2.75" mandrel bent catback with 4" cannon.

**Marz** · 17-03-2005 03:09 PM

Originally Posted by franki

thanx for the help guys. i think i might go with a 2.75" mandrel bent catback with 4" cannon.

Get me one while you're at it

**Marz** · 17-03-2005 03:10 PM

Originally Posted by z3lda

dont listen to them. u need ATLEAST a 5" boxing bend piping, with 6" inlet muffler and 15" muffler tip. gains have been recorded up to 45kws at the rear wheels.

I had one of the HKPEXZIGEN 15" mufflers, and found 4 kittens sleeping in it.