[DIY REQUEST] how to remove dc2r side skirts

[juns]

i've taken a look at my side skirts and i was hoping to take them off as i have purchased some optional side skirts just wanting to know a detailed instructions to removing these side skirts as i don't want to break any clips or force anything off

anyhelp would be grateful! cheers!

[m3ntAL_l2]

take off all the screws from under and sides.

and then u slide it to the back, off u go. theres no clips

[juns]

take off all the screws from under and sides.

and then u slide it to the back, off u go. theres no clips

oh so there's no difference with the optional sides? can't quite explain it. but basically you have the oem side skirts then you have the oem optional side skirts where it's raised at the back is there any clips or anything towards that?

[geeang]

You just take off the screws, and you actually slide it towards the front.
Just grab it from underneath after you've taken all the black screws out from underneath, then you push it hard towards the front and it will just slide out of the clips.

Then to take the clips out you twist them 45 degrees and they just pop out.
To reinstall, or install your optionals, slide the clips onto the side skirt's brackets and just push it straight onto the side.