Page 350 of 1751 FirstFirst ... 2503003403473483493503513523533604004508501350 ... LastLast
Results 4,189 to 4,200 of 21004
  1. #4189
    Member Array
    Join Date
    Jan 2009
    Location
    Garage
    Car:
    FDrive

    buddyclub mods

    latest mods

    buddyclub e-throttle booster
    buddyclub racing spec condenser

    i know ppl have negative impressions regarding the e-throttle booster but i tried it on and it does make a huge difference in throttle responsiveness.. definitely can feel it and with buddyclub its adjustable and can be turned on and off.. great stuff

    got cusco front brace to be put on, coz of those stupid tight ass bolts would need a bolt gun
    Last edited by JOhnnyFD; 18-06-2009 at 05:40 PM. Reason: impressions

  2. #4190
    Member Array
    Join Date
    Nov 2008
    Location
    North Shore, Sydney
    Car:
    '03 BB AP1
    wow... how much did it set u back? damnnn nice additions. whats the racing spec condenser do?

  3. #4191
    Member Array
    Join Date
    Jan 2009
    Location
    Garage
    Car:
    FDrive
    Quote Originally Posted by black8thgen View Post
    wow... how much did it set u back? damnnn nice additions. whats the racing spec condenser do?
    The Buddy Club Racing Spec Condenser combines an electrical grounding system with a battery current and voltage stabilisation control unit. The unit is designed to stabilise electrical noise and voltage spikes and offer additional grounding

    quote:
    "We recently dynoed Buddy Club's Racing Spec Condenser - an electrical grounding system with a battery current and voltage stabilization control unit. I have to maintain anonymity of the race car, but it showed a 3% increase in torque throughout the rev-range that is used on the track (3500 RPM and on). The driver of the race car was taken by complete surprise that such an electronic gadget could do this, as we ran multiple dyno runs with the same, consistent results. We disconnected the condenser, and it was back to previous torque curve, reconnect it, and it jumps back around 3%. The driver was a bit more than excited as he thought he had done most of the tricks for horsepower including expensive processes such as polishing the gears to aid reduce loss of power due to friction."

    Made in Japan.. lmao

    pm u price black8th

  4. #4192
    Member Array
    Join Date
    Nov 2008
    Location
    North Shore, Sydney
    Car:
    '03 BB AP1
    ah sweet thx a lot for that.. hmmm. did they install it for u over at buddyclub? sounds tempting =D

  5. #4193
    Member Array
    Join Date
    Oct 2006
    Location
    Sydney
    Car:
    FD1, RS125
    Quote Originally Posted by JOhnnyFD View Post
    The Buddy Club Racing Spec Condenser combines an electrical grounding system with a battery current and voltage stabilisation control unit. The unit is designed to stabilise electrical noise and voltage spikes and offer additional grounding

    quote:
    "We recently dynoed Buddy Club's Racing Spec Condenser - an electrical grounding system with a battery current and voltage stabilization control unit. I have to maintain anonymity of the race car, but it showed a 3% increase in torque throughout the rev-range that is used on the track (3500 RPM and on). The driver of the race car was taken by complete surprise that such an electronic gadget could do this, as we ran multiple dyno runs with the same, consistent results. We disconnected the condenser, and it was back to previous torque curve, reconnect it, and it jumps back around 3%. The driver was a bit more than excited as he thought he had done most of the tricks for horsepower including expensive processes such as polishing the gears to aid reduce loss of power due to friction."

    Made in Japan.. lmao

    pm u price black8th
    Nice additions!

    hmm, but interesting how it says torque but no mention of bhp or kw.

  6. #4194
    Member Array
    Join Date
    Jan 2009
    Location
    Garage
    Car:
    FDrive
    Quote Originally Posted by black8thgen View Post
    ah sweet thx a lot for that.. hmmm. did they install it for u over at buddyclub? sounds tempting =D
    nah, install urself.. diy style

    Quote Originally Posted by howy View Post
    Nice additions!

    hmm, but interesting how it says torque but no mention of bhp or kw.
    think its torque.. but i havent dynoed my car to know how it would affect kw

    but the product manual goes to say it:
    increase power and torque
    improve fuel economy
    smooth idling and improve engine response
    improve audio quality
    increase headlight brigthness
    improve battery life

    hey howy, u know for ur front strut brace.. does water get into ur engine? since u have to remove those 2 side plastic covers
    Last edited by JOhnnyFD; 18-06-2009 at 06:43 PM.

  7. #4195
    Member Array
    Join Date
    Nov 2008
    Location
    North Shore, Sydney
    Car:
    '03 BB AP1
    ahh, easy install? where does it go anywaY?

  8. #4196
    Member Array
    Join Date
    Jan 2009
    Location
    Garage
    Car:
    FDrive
    i placed the adjustable unit in the right side holder and drilled a hole at the back for the wire access

    then it connects to the ecu adjustment device which i placed inside in the right hand side of the dashboard.. wire then connects to the accelerator sensor

    very clean mod if u drill the hole.. if not the wire will be outside
    Last edited by JOhnnyFD; 18-06-2009 at 06:47 PM.

  9. #4197
    Member Array
    Join Date
    Feb 2008
    Location
    Kellyville, SYDNEY
    Car:
    Civic FD1, Impreza, GE6
    Quote Originally Posted by sKy.xD View Post
    Has anyone taken the rear bottom part of the seats off?

    Either I can't get mine back on or I think i snapped some bit of plastic that possibly meant to somehow hook on?

    Just wanting to know if anyone else has had this problem
    nope...just pull the latch and theres a bolt that holds on 2 it aswell near the seatbelt either on left or right forgot
    but im quite sure there was only 1

  10. #4198
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    johnny can u pm me price too..
    i want to fix the dwire lag aswell in the long term..

  11. #4199
    Member Array
    Join Date
    Jan 2009
    Location
    Garage
    Car:
    FDrive
    Quote Originally Posted by ekdez View Post
    johnny can u pm me price too..
    i want to fix the dwire lag aswell in the long term..
    pm sent
    definitely does work

  12. #4200
    Hey Johnny, PM the price for the eThrottle booster?

    Cheers, Alex

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.