Results 1 to 12 of 12

Thread: car wont lock

  1. #1
    Member Array
    Join Date
    Jun 2006
    Location
    Sydney CBD
    Car:
    FD2 4DR 2009

    car wont lock

    i noticed few days when i pressed my alarm the doors dont lock..so now i have to press alarm and maunal lock it my self.. does anyone know wat the problem is.. car is ek sedan thanx

  2. #2
    Moderator - here to help Array
    Join Date
    Sep 2003
    Location
    fairfield, NSW
    when you press the remote button, does the door lock move? can you hear it trying to lock?

  3. #3
    Ozhonda Supporter Array
    Join Date
    Dec 2008
    Location
    Bankstown
    Car:
    N/A is best
    u may have a switch that kills the alarm on ur car if its aftermarket or it could be a fuse
    No Comment

  4. #4
    Member Array
    Join Date
    Jun 2006
    Location
    Sydney CBD
    Car:
    FD2 4DR 2009
    i dont seem to hear anything.. where is the fuse..any other ideas what may be?? when the cars locked i press the alarm it seems to unlock again but wen i press it again it doesnt lock hmmm

  5. #5
    Member Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    1992 Del Sol
    blown fuse, wire gone loose, battery dead.

    if the key has a light then its not battery on the key.
    if the wires gone lose, certain door doesn't lock or flashing headlights and arming sequence is still there.
    blown fuse no reaction to key press.

  6. #6
    Member Array
    Join Date
    Jun 2006
    Location
    Sydney CBD
    Car:
    FD2 4DR 2009
    nah not the batt i just got new one just today..

    where bouts is the fuse

  7. #7
    Member Array
    Join Date
    Aug 2007
    Location
    Sydney
    Car:
    Choo Choo shoe.
    Wires loose is your best bet.
    Its probably open circuit somewhere.
    Id be guessing it will be near anything that moves. ie. Your door harness.
    Its possible that your door actuator wire has broken. Probably got brittle and since your door opens and closes it bends the wire in one position, and over time it just snaps.

  8. #8
    Member Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    1992 Del Sol
    fuse is where the installer installed it. most likely underdash under the steering wheel.

    but yes best bet is the window has pushed the wires down and snapped them.

  9. #9
    Member Array
    Join Date
    Jun 2006
    Location
    Sydney CBD
    Car:
    FD2 4DR 2009
    ill try the fuse hopefully dont find out that the wire has snapped

  10. #10
    Newcomer Array
    Join Date
    Jan 2009
    Location
    Brisbane
    Car:
    BIKE
    The fuze should normally be under the bonnet around the driver side, there should be a table/diagram on the fuse box to tell you what fuse goes where.

    If you cant find any relating to lock ect. there should be another fuse box inside your car under your steering wheel somewhere ! hope that helps had to change my fuses recently

  11. #11
    Member Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    1992 Del Sol
    oh it also depends what alarm you have lol.

  12. #12
    Member Array
    Join Date
    Jun 2006
    Location
    Sydney CBD
    Car:
    FD2 4DR 2009
    it came stock witht he car

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.