Aftermarket engine & torque mounts.

[Lukezen27]

nah...go the spoon luke,woolworths, aisle 4,next to the knives & forks,heaps cheap

Kook!!!!!!!!!

[geeang]

I got my innovative billet mounts (60A red) for $400 delivered from Ebay, and that's before the dollar recovered to what it is now.

[Lukezen27]

I got my innovative billet mounts (60A red) for $400 delivered from Ebay, and that's before the dollar recovered to what it is now.

What car and motor?

Hows it feel?

[geeang]

DC2 Integra, B18C, I haven't got them installed yet (in a week or two).

[Limbo]

i did mine and it was all good. No harsh vibrations at all.
The car certainly feels more responsive turning quickly

[Bludger]

i did mine and it was all good. No harsh vibrations at all.
The car certainly feels more responsive turning quickly

you did it as in you ****ed your car??

which hole?? I thought more vibration would feel better.

or were you talking about engine mounts. if so, please be more specific.
what did you do, what did you use.

turn quickly? please elaborate, thanks

[Limbo]

energy suspension
Rear mount and 2 torque mounts

[Bludger]

Everyone referring to (especially Ron) Sikaflex 227.

My concern is that its gonna be too soft, because I have heard people use 227 for the windscreen sealant?? being used in that sort of application would mean that its quite soft??? I wouldn't really know. Can anyone confirm this.

I bought a tube of 227 ready to fill in my mounts very, very soon.
Should I exchange it for a tube of 255???

My application is just spirited street driving.
Thanks

[Lukezen27]

Everyone referring to (especially Ron) Sikaflex 227.

My concern is that its gonna be too soft, because I have heard people use 227 for the windscreen sealant?? being used in that sort of application would mean that its quite soft??? I wouldn't really know. Can anyone confirm this.

I bought a tube of 227 ready to fill in my mounts very, very soon.
Should I exchange it for a tube of 255???

My application is just spirited street driving.
Thanks

I'd also like to know the best Sikaflex version too

[bennjamin]

255 black used here. Still shaking my dash 3 years on.

It's VERY important to use clean non-cracked mounts to fill !

[Bludger]

you have any opinion on 227 Bennjamin?

[Lerlo]

Anyone used Bostik Seal n Flex for their mounts, I just filled my mounts with that before i found this thread.....
Its polyurethane as well, have a friend used it with no problems...